DT50-P1114 SICK Dx50 Heated Laser Distance Sensor
DT50-P1114 is a rugged industrial laser distance sensor from SICK. It belongs to the Dx50 DT50 Heated family. The sensor uses HDDM optical time-of-flight measurement. It measures natural objects up to 10 m without a reflector. An internal heater supports deep-freeze operation down to -40 °C.
This model suits cold storage, outdoor logistics, heavy-duty automation, and distance monitoring. It offers a visible red laser, digital and analog outputs, and a metal zinc die-cast housing. The DT50-P1114 combines long range, fast response, and strong environmental tolerance.
Why Buy From Oiltech Controls?
- 15+ years in industrial automation spare parts
- Global shipment support through FedEx, UPS, and DHL
- Tested industrial surplus and refurbished options
- 12-month warranty for qualified products
- Technical verification before shipment
- Support for obsolete control systems
Questions? Email info@oiltechcontrols.com or message +86 158 8020 0923.
Technical Specifications
| Parameter | Specification |
|---|---|
| Brand | SICK |
| Model | DT50-P1114 |
| Series | Dx50 / Dx50 DT50 Heated |
| Part Number | 1047581 |
| Module Type | Optical time-of-flight laser distance sensor |
| Measurement Principle | HDDM High Definition Distance Measurement |
| Measuring Range | 200 mm to 10,000 mm at 90% remission |
| Reduced Range | 200 mm to 6,500 mm at 18% remission |
| Low Remission Range | 200 mm to 4,000 mm at 6% remission |
| Light Source | Visible red laser diode, 658 nm |
| Laser Class | Class 2, IEC 60825-1:2014, EN 60825-1:2014 |
| Optical Power | Average below 1 mW, pulse peak 180 mW |
| Pulse Duration | 5 ns |
| Response Time | Fast 20 ms, Slow 30 ms |
| Repeatability | At least 2.5 mm |
| Measurement Accuracy | Typical plus or minus 10 mm |
| Digital Output | 1x PNP, up to 100 mA |
| Analog Output | 1x voltage output, 0 V to 10 V |
| Analog Load | At least 5 kΩ, 16-bit |
| Input | Multifunctional input MF |
| Supply Voltage | DC 24 V, range 18 V to 30 V |
| Heater Voltage | VS above 15 V required |
| Power Consumption | Up to 28 W with heater active |
| Electrical Connection | M12 male connector, 8-pin |
| Operating Temperature | -40 °C to +65 °C with internal heating |
| Extended Temperature | -40 °C to +80 °C with 2 cooling plates |
| High Temperature Option | -40 °C to +140 °C with cooling plates and filter |
| Storage Temperature | -40 °C to +75 °C |
| Protection Rating | IP65, EN 60529 |
| Dimensions | 36.1 mm x 62.7 mm x 57.7 mm |
| Housing Material | Zinc die-cast ZNAL4CU1 |
| Optical Window | Acrylic glass PMMA |
| Weight | Approx. 200 g |
Key Performance Features
- Long range: Direct diffuse measurement up to 10 m
- No reflector: Works on natural objects
- Fast response: 20 ms in fast mode
- High repeatability: At least 2.5 mm
- Ambient light stability: HDDM time-of-flight technology
- Cold operation: Internal heater down to -40 °C
- Rugged housing: Zinc die-cast for heavy-duty use
- Easy setup: LC display and menu buttons
Installation Guide
- Mount the sensor on a stable bracket.
- Keep the laser beam free from obstructions.
- Use the M12 8-pin connector for wiring.
- Confirm supply voltage is 18 V to 30 V DC.
- Use VS above 15 V for internal heating.
- Align the sensor to the target surface.
- Avoid strong direct light on the target.
- Check IP65 sealing after installation.
Setup and Maintenance
- Use the LC display for quick parameter checks.
- Navigate menus with the built-in buttons.
- Set fast or slow response based on the task.
- Clean the PMMA window with a soft cloth.
- Do not use harsh solvents on the optical window.
- Check cables and connectors regularly.
- Verify output signals during machine downtime.
Compatibility Notes
- Works with common 24 V DC industrial control systems.
- PNP digital output fits many PLC input cards.
- 0 V to 10 V analog output suits standard analog inputs.
- M12 8-pin connection supports fast replacement.
- Suitable for SICK Dx50 DT50 Heated system integration.
Certifications and Standards
- Laser safety: IEC 60825-1:2014
- Laser safety: EN 60825-1:2014
- Protection rating: EN 60529 IP65
- Laser class: Class 2
Package List
- 1x SICK DT50-P1114 sensor
- 1x quick start or documentation set as supplied
- Protective packing for safe transport
Warranty: 12-month warranty. Coverage applies to qualified products under normal use.
Shipping: FedEx, UPS, and DHL options are available. We support global shipment.
Typical Applications
- Cold storage and deep-freeze logistics
- Industrial automation distance control
- Crane and transport positioning
- Material handling and pallet detection
- Outdoor or unheated production areas
- Obsolete control system replacement
Diagnostic Capabilities
- LC display shows setup and reading status.
- Menu system helps verify parameters.
- Digital output supports simple pass or fail checks.
- Analog output helps monitor distance trends.
- Technical verification available before shipment.
FAQ
Q: Does the DT50-P1114 need a reflector?
A: No. It measures natural objects directly.
Q: What is the maximum range?
A: Up to 10 m at 90% remission.
Q: Does it work in deep freeze?
A: Yes. The internal heater supports -40 °C operation.
Q: What output types are available?
A: One PNP digital output and one 0 V to 10 V analog output.
Q: What connector does it use?
A: An M12 8-pin male connector.
Q: What is the warranty?
A: 12 months for qualified products.
Q: How do you ship?
A: We ship by FedEx, UPS, and DHL.
Q: Can you help with obsolete systems?
A: Yes. We support obsolete control systems.
Contact info@oiltechcontrols.com or +86 158 8020 0923 for stock, lead time, and technical checks.
Copyright © 2026 Oiltech Controls Limited. All rights reserved.
Original Source: https://www.oiltechcontrols.com/
Reviews
There are no reviews yet.