Product Overview
The Yokogawa F3XD64-6M is a 64-point DC input module. It uses matrix scan input type. The module fits Yokogawa F3 series PLC systems. It reads 64 discrete signals through an 8 x 8 matrix. This design saves panel space and wiring. Each input is photocoupler isolated. Isolation protects the controller from field noise and ground loops. The module accepts 12-24 V DC nominal input. It works over a 10.2-26.4 V DC range. Response time is 16 ms max for both ON-to-OFF and OFF-to-ON. One 40-pin connector handles all field wiring. Current draw is 110 mA at 5 V DC. The unit weighs about 130 g. It suits machine control, panel retrofits, and legacy F3 system maintenance.
Technical Specifications
| Parameter | Value |
|---|---|
| Brand | Yokogawa |
| Model | F3XD64-6M |
| Series | Yokogawa F3 Series |
| Module type | DC input matrix scan module |
| Input type | Matrix scan |
| Number of inputs | 64 points |
| Matrix configuration | 8 x 8 matrix |
| Isolation method | Photocoupler isolation |
| Rated input voltage | 12-24 V DC |
| Rated input current | 3.9 mA at 12 V DC / 8.2 mA at 24 V DC |
| Operating voltage range | 10.2-26.4 V DC |
| ON condition | 8.0 V DC min, 2.6 mA min |
| OFF condition | 3.4 V DC max, 1.0 mA max |
| Input response time OFF to ON | 16 ms max |
| Input response time ON to OFF | 16 ms max |
| Simultaneous ON ratio limit | Not specified by manufacturer |
| External connection | One 40-pin connector |
| Common points | 8 x 8 matrix |
| Interrupt | None |
| Current consumption | 110 mA at 5 V DC |
| Weight | 130 g |
| Suffix code meaning | F3XD64-6M: DC input matrix scan, 12-24 V DC, 64 points |
| Operating temperature | 0 to 55°C |
| Storage temperature | -20 to 75°C |
| Operating humidity | 10 to 90% RH, non-condensing |
| Storage humidity | 10 to 90% RH, non-condensing |
| Atmosphere | No corrosive gas, no flammable gas, no heavy dust |
Installation Guide
- Mount the module in a clean, dry panel. Keep 0 to 55°C air around it.
- Wire field signals to the 40-pin connector. Follow the 8 x 8 matrix pin map.
- Keep input cables away from motor and inverter power lines.
- Check supply polarity before power-up. Range is 10.2-26.4 V DC.
- Confirm ON level reaches 8.0 V DC min at the terminal.
- Confirm OFF level stays below 3.4 V DC max to avoid false triggers.
- Use shielded cable when cable runs exceed a few meters.
Commissioning and Maintenance
Commissioning is simple. Apply 5 V DC logic power. Check the 110 mA current draw. Then test each matrix row and column. Force one input ON. Watch the response in the PLC monitor. The expected delay is 16 ms max. Repeat for all 64 points. For maintenance, keep the connector clean. Re-tighten the connector screw after service. Replace the module if an input stays ON without a field signal. The photocoupler isolation limits most field faults to one channel. No interrupt line exists, so scan timing depends on the host program.
Compatibility Notes
The F3XD64-6M fits Yokogawa F3 series racks. It uses the F3 backplane and 5 V DC logic rail. It works with standard F3 CPU and power modules. The 40-pin connector needs the matching F3 terminal block or cable. This module is a direct fit for F3XD64 matrix scan slots. Check your rack slot map before ordering. Contact us for cross-check help.
Diagnostics Capability
The module reports input state through the matrix scan. It has no self-diagnostic LED per point. Fault finding relies on PLC input monitoring. Use the PLC monitor to spot stuck or dead points. A dead point often means a blown field fuse or a broken wire. A stuck point often means a shorted field line. Isolation keeps one bad channel from pulling down the whole matrix. This makes board-level swap fast and safe.
Typical Applications
- Machine tool signal collection with many discrete sensors
- Packaging and assembly line pushbutton and limit switch input
- Legacy F3 PLC panel retrofit and spare parts support
- Process skid status monitoring with 24 V DC field devices
- Material handling systems with dense input counts
Why Buy From Oiltech Controls?
- 15+ years of hands-on industrial automation spare parts work
- Worldwide shipping with FedEx, UPS, and DHL
- Tested industrial surplus and refurbished options available
- 12-month warranty on every module we ship
- Technical check and power-up test before shipment
- Support for obsolete and hard-to-find control systems
- Clear packing list and fast quote response
Packing List and Warranty
- 1 x Yokogawa F3XD64-6M DC input matrix scan module
- 1 x protective packing carton
- 1 x test report or verification note
- 12-month warranty against functional defects
- Shipping by FedEx, UPS, or DHL as you choose
Certification Information
The module follows Yokogawa factory standards for the F3 series. It meets the original F3 electrical and isolation design. We ship it as a tested spare. Ask us for available test records or photos before you order.
FAQ
Q: Is this module new or surplus?
We offer tested surplus and refurbished options. Ask for current stock status.
Q: What voltage does it accept?
12-24 V DC nominal, with a 10.2-26.4 V DC operating range.
Q: How many inputs does it have?
64 inputs, arranged as an 8 x 8 matrix.
Q: What is the response time?
16 ms max for both OFF-to-ON and ON-to-OFF.
Q: Is it isolated?
Yes. Each input uses photocoupler isolation.
Q: What connector does it use?
One 40-pin connector.
Q: Does it have a warranty?
Yes. 12-month warranty.
Q: How fast is shipping?
We ship by FedEx, UPS, or DHL. Lead time depends on stock.
Q: Can you help confirm fit?
Yes. Email your rack model and slot map to info@oiltechcontrols.com.
Contact Information
Email: info@oiltechcontrols.com
Phone / WhatsApp: +86 158 8020 0923
Copyright © 2026 Oiltech Controls Limited. All rights reserved.
Original Source: https://www.oiltechcontrols.com/
All rights reserved.
Reviews
There are no reviews yet.