3AUA0000108650 FDPI-02 ABB Panel Bus Adapter Kit
The 3AUA0000108650 kit carries the FDPI-02 panel bus adapter for ABB drives. It links a control panel, a PC, and the drive on one RS-485 bus. The board plugs between the control unit and an F-type option. A built-in 120 ohm switch S1 sets bus termination. The PCB is coated and UL recognized parts are used. Rated lifetime is 20 years. IP20 protection fits closed cabinets.
Connector Map
- X1: 6-pin female to control unit, RJ-11
- X2: 8-pin shielded female to panel, RJ-45
- X3: 8-pin shielded female to PC, RJ-45
- X100: 20-pin female feed-through to control unit
- X101: 20-pin male feed-through to small F-type option
Bus and Environment
- Bus use: PC bus or control panel bus
- Max nodes: 32 (panel, PC, drives combined)
- Cable: shielded CAT 5e or better Ethernet
- Termination: 120 ohm via switch S1
- Operating: +0 to +70 °C
- Storage: -40 to +70 °C
- Humidity: 95% non-condensing
- EMC: EN 61800-3:2004
- Note: only the FDPI-02 to control unit cable ships in the box
Suitable Equipment
- ABB drives with F-type option slots
- Panels using an external control panel over RJ-45
- PC tool setups for parameter download
- Multi-drive RS-485 groups up to 32 nodes
- Retrofit cells keeping the original panel bus
Delivery and Warranty
- Warranty: 12 months
- Dispatch: 24-28 hours after order
- Couriers: FedEx, UPS, DHL
- Tracking number sent at shipment
FAQ
Q: Should switch S1 be on or off in my panel?
A: Turn S1 on only at the last node of the bus. Leave it off on middle nodes to avoid signal loss.
Q: Can I run 32 drives plus a panel on one bus?
A: No. The 32 node limit counts panels, PCs, and drives together. Split the bus if you exceed it.
Q: Is the cable to my control panel included?
A: No. Only the FDPI-02 to control unit cable ships. Order panel and PC cables separately.
Q: Will the feed-through ports pass signals to an F-type option?
A: Yes. X100 and X101 pass the connection through. Check the option manual for pin use.
Q: What should I check on a used FDPI-02 kit?
A: Ask for connector photos, S1 switch condition, and PCB coating checks. Confirm the 12-month warranty and dispatch time.
Reviews
There are no reviews yet.