Product Overview
The Keyence IL-065 is a CMOS laser displacement sensor head from the IL series. It uses triangulation with a visible red laser. This mid-range reflective type suits inline measurement, profile checks, and position feedback in industrial automation. The head pairs with an IL series amplifier unit for power, display, and output. It is active and in official production as of 2026-09.
Technical Specifications
| Brand | Keyence |
| Model | IL-065 |
| Series | IL series |
| Module Type | CMOS laser displacement sensor head |
| Sensor Type | Triangulation, reflective |
| Reference Distance | 65 mm |
| Measurement Range | 55 to 105 mm |
| Light Source | Red semiconductor laser, 655 nm visible light |
| Laser Output | 560 µW |
| Laser Class | Class 2 (IEC 60825-1; FDA CDRH Part1040.10) |
| Spot Diameter | Approx. 550 x 1,750 µm at standard distance |
| Linearity | ±0.1 % of F.S. (55 to 75 mm) |
| Repeatability | 2 µm (standard white diffuse target, 1 ms sampling) |
| Sampling Rate | 0.33 / 1 / 2 / 5 ms (4 levels selectable) |
| Frequency Response | Up to 3 kHz at 0.33 ms sampling |
| Temperature Characteristics | 0.06 % of F.S./°C |
| Operating Temperature | -10 to +50 °C (No condensation or freezing) |
| Relative Humidity | 35 to 85 % RH (No condensation) |
| Protection Rating | IP67 |
| Weight | Approx. 75 g |
| Built-in Ports | None |
| Protocols | None |
| Communication Expansion | None |
| Supply Voltage | Powered by IL series amplifier unit |
| Output Type | Sensor head; connects to IL amplifier |
Installation Guide
- Mount the IL-065 with the reference distance at 65 mm.
- Keep the laser spot clear of obstructions.
- Use the IP67 rating for washdown areas.
- Connect the head to a compatible IL series amplifier.
- Do not power the head directly. The amplifier supplies power.
Setup and Maintenance
- Select sampling rate: 0.33 / 1 / 2 / 5 ms.
- Clean the lens with a soft cloth. Avoid solvents.
- Check spot alignment after mounting.
- Verify repeatability with a white diffuse target.
- No built-in ports or protocols simplify wiring.
Compatibility Notes
The IL-065 works only with IL series amplifier units. It has no standalone communication. It is a direct replacement for existing IL-series setups. No adapter or expansion module is required.
Certifications
- Class 2 laser per IEC 60825-1
- FDA CDRH Part1040.10 compliant
- IP67 environmental protection
Packing List
- 1x Keyence IL-065 sensor head
- 1x Documentation set
- 1x Protective packaging
Warranty and Shipping
All units include a 12-month warranty. We ship by FedEx, UPS, and DHL. Tracking is provided for every order. Contact info@oiltechcontrols.com or +86 158 8020 0923 for shipping quotes.
Typical Applications
- Inline thickness measurement
- Profile and step detection
- Position feedback on moving parts
- Quality checks on small assemblies
- Obsolete control system retrofits
Diagnostic Capability
The head relies on the IL amplifier for signal display and diagnostics. The amplifier shows laser status, signal level, and error codes. This helps engineers isolate alignment or target issues fast. No onboard diagnostics exist on the head itself.
Why Buy From Oiltech Controls?
- 15+ years in industrial automation spare parts
- Global shipment support
- Tested industrial surplus and refurbished options
- 12-month warranty
- Technical verification before shipment
- Support for obsolete control systems
FAQ
Q: Does the IL-065 work alone?
A: No. It needs an IL series amplifier unit.
Q: What is the measurement range?
A: 55 to 105 mm.
Q: What is the repeatability?
A: 2 µm at 1 ms sampling.
Q: Is it protected against dust and water?
A: Yes. It has an IP67 rating.
Q: What is the warranty?
A: 12 months.
Copyright © 2026 Oiltech Controls Limited. All rights reserved.
Original Source: https://www.oiltechcontrols.com/
Reviews
There are no reviews yet.