IS220PTCCH1B GE Mark VIe Thermocouple Input Module

Technical Engineering Profile

• The IS220PTCCH1B functions as a primary Thermocouple Input Module within the Mark VIe I/O pack suite.
• Designed with 12 combustion-optimized input channels plus one dedicated cold-junction reference channel.
• Supports versatile input types including E, J, K, S, and T thermocouples, plus ±45mV range.
• Engineered for high-reliability applications including Simplex, Duplex, and Triple Modular Redundant (TMR) configurations.
• Fully operational with both grounded and ungrounded field sensors within a 984-foot cable run limit.

Operational Constraints & Specs

• Series Compatibility: GE Speedtronic Mark VIe Gas Turbine Control.
• Power Requirement: 28 Vdc supply at 0.16 Amp.
• Input Sensitivity: Supports signal mV inputs between -8 to 45 mV.
• Loop Resistance: Maximum allowable field cable resistance of 450 ohms.
• Interface Density: 12 channels optimized for combustion monitoring.

Oiltech Controls’ Insight

• We verify each IS220PTCCH1B for internal circuitry stability before dispatch to ensure zero-drift readings on critical temperature loops.
• Best suited for combustion turbine exhaust monitoring where signal noise rejection is paramount.
• Ensure shield grounding is consistent across all 12 channels to maximize accuracy in high-EMI turbine environments.
• For urgent requirements, we prioritize 24-28 hour dispatch via FedEx, UPS, or DHL.
• Need technical assistance? WhatsApp +86 158 8020 0923 or email info@oiltechcontrols.com.

Typical Industrial Deployment

• Gas Turbine Temperature Control and Monitoring.
• Combustor Flame Detection and Thermal Mapping.
• Mark VIe Distributed Control System (DCS) I/O cabinets.
• Exhaust Gas Temperature (EGT) measurement arrays.
• TMR-protected critical safety shutdown systems.

Professional FAQ & Selection Guide

• Q: Can I mix thermocouple types on the same module?
• A: Yes, the module is software-configurable per channel, allowing you to mix supported types (E, J, K, S, T) as needed.
• Q: What is the maximum distance for field wiring?
• A: Field wiring can extend up to 984 feet (300 meters), provided your total loop resistance remains below 450 ohms.
• Q: How does this pack handle TMR architecture?
• A: The IS220PTCCH1B is built to operate in TMR groups, where three packs cross-check input data to ensure fault-tolerant turbine operation.
• Q: Does the module require recalibration during installation?
• A: No, these units are factory-calibrated for high precision; however, verify your cold-junction compensation settings in the control software.
• Q: Selection Advice: Why choose the PTCCH1B specifically?
• A: If your turbine requires high-density combustion monitoring with TMR capabilities, this unit is the validated standard for the Mark VIe series.

Logistics & Quality Assurance

• Warranty: Full 12-month performance guarantee.
• Dispatch: Rapid 24-28 hour processing.
• Shipping: Global transit via FedEx, UPS, and DHL.
• Support: Email info@oiltechcontrols.com for technical documentation.

Copyright © 2026 Oiltech Controls Limited. https://www.oiltechcontrols.com/ All rights reserved.

All rights reserved.