Product Overview
SEW-Eurodrive MC07B0015-5A3-4-00 is a MOVITRAC B frequency inverter. It delivers precise speed control for 3-phase AC motors. Moreover, this compact drive suits industrial automation. The unit offers 1.5 kW (2 HP) output. In addition, it accepts 380-500 VAC supply. It runs at 50/60 Hz. Also, the drive is 4Q with brake chopper. It includes C2 suppression. Furthermore, it mounts in tight cabinets. The drive handles frequent starts and stops. As a result, it gives stable torque at low speed. The design targets panel builders and OEMs. Therefore, it fits conveyor, pump, and fan duty. It replaces failed units fast. In practice, it supports legacy MOVITRAC B systems.
Technical Specifications
| Brand | SEW-Eurodrive |
| Model | MC07B0015-5A3-4-00 |
| Series | MOVITRAC B |
| Module Type | AC Drive / Frequency Inverter |
| Power | 1.5 kW (2 HP) |
| Input Supply | 380-500 VAC, 3-phase |
| Frequency | 50/60 Hz |
| Output | 3-phase, variable frequency |
| Braking | 4Q with brake chopper |
| EMC Filter | Suppression C2 |
| Control Mode | V/f and sensorless vector |
| Speed Range | Wide adjustable range |
| Frequency Resolution | Fine digital setting |
| Linearity | Stable speed tracking |
| Sensitivity | Fast response to load change |
| Ambient Temperature | 0 to 40 C typical cabinet range |
| Environment | Indoor, dust-controlled panel |
| Noise Immunity | Built-in C2 filter cuts EMI |
| Mounting | Vertical wall or panel mount |
| Cooling | Forced air, clear airflow needed |
| Compatibility | Matches MOVITRAC B family |
| Certification | CE marked, EMC C2 class |
| Warranty | 12 months |
Installation Guide
- First, isolate all power before wiring.
- Then mount the drive vertically on a solid panel.
- Also keep 100 mm clearance above and below.
- Next, use shielded motor cable for EMC.
- In addition, ground the drive and motor firmly.
- After that, check supply matches 380-500 VAC.
- Then set motor data before first run.
- Finally, test at low speed first.
Commissioning and Maintenance
Setup uses the keypad and parameter groups. For instance, most motor data entries take minutes. Meanwhile, the drive shows fault codes on the display. These codes speed up diagnosis. In addition, fan and heatsink checks keep the unit cool. Also tighten terminals at routine service. Then clean dust from the heatsink. Finally, recheck parameters after motor change.
Diagnostics and Compatibility
- Clear fault codes appear on the display
- Overcurrent and overvoltage protection
- Overtemperature trip and warning
- Brake chopper and resistor support
- Fits existing MOVITRAC B panels
- Works with standard 3-phase motors
- Matches legacy SEW control layouts
- Keeps spare-part swaps simple
Typical Applications
Conveyors, pumps, fans, mixers, packaging lines, material handling, and general machine speed control. The 4Q brake chopper helps on high-inertia loads.
Why Buy From Oiltech Controls?
- Over 15 years in industrial automation spare parts
- Worldwide shipping through FedEx, UPS, and DHL
- Tested surplus and refurbished options
- 12-month warranty on every unit
- Technical check before dispatch
- Support for obsolete control systems
Packing List and Shipping
- 1 x SEW-Eurodrive MC07B0015-5A3-4-00 inverter
- 1 x protective packing set
- 1 x test report card
- Shipping by FedEx, UPS, or DHL
- Tracking number sent after dispatch
FAQ
Q: What motor size does this drive run?
A: It suits a 1.5 kW (2 HP) 3-phase motor.
Q: Does it include a brake chopper?
A: Yes. It is 4Q with brake chopper.
Q: What supply voltage is needed?
A: 380-500 VAC, 3-phase, 50/60 Hz.
Q: Is a warranty included?
A: Yes. Every unit carries a 12-month warranty.
Q: How fast is shipping?
A: We ship by FedEx, UPS, and DHL with tracking.
Q: Can you help with setup?
A: Yes. Our team gives technical support by email and WhatsApp.
Contact Us
Email: info@oiltechcontrols.com
WhatsApp: +86 158 8020 0923
Copyright © 2026 Oiltech Controls Limited. All rights reserved.
Original Source: https://www.oiltechcontrols.com/
All rights reserved.
%20output.%20In%20addition,%20it%20accepts%20380-500%20VAC%20supply.%20It%20runs%20at%2050/60%20Hz.%20Also,%20the%20drive%20is%204Q%20with%20brake%20chopper.%20It%20%5B…%5D&media=https://www.oiltechcontrols.com/wp-content/uploads/2026/10/MC07B0015-5A3-4-00-1.jpg){kind=link}
Reviews
There are no reviews yet.