TM5SAO2L Schneider Electric Modicon TM5 Analog Output Module
TM5SAO2L is a compact analog output module from the Schneider Electric Modicon TM5 series. This unit gives you 2 software-configurable channels for ±10 Vdc or 0-20 mA output. As a result, it controls valves, drives, and analog actuators in distributed I/O systems with high precision.
Moreover, this module fits Modicon M241, M251, M258, and LMC058 platforms. It uses the TM5 bus for power and communication. In addition, the 12-bit resolution and 1 ms response time suit fast control loops. The design is IP20 rated and runs from 0 to +55 °C.
Status: Active. Last verified: 2026-09.
Technical Specifications
| Brand | Schneider Electric |
| Model | TM5SAO2L |
| Series | Modicon TM5 |
| Module Type | Analog output module |
| Channels | 2 |
| Output Signal | ±10 Vdc / 0-20 mA, configurable per channel |
| Resolution | 12 bits |
| Accuracy | ±0.3% of full scale at 25 °C; ±0.5% FS over temperature |
| Isolation | No isolation between channels; 500 Vrms AC between channels and bus |
| Response Time | 1 ms max. for output change |
| Sampling | 200 µs |
| Supply Voltage | 24 Vdc via TM5 bus |
| Power Consumption | 1.11 W |
| Bus Current | 2 mA at 5 Vdc; 46 mA at 24 Vdc |
| Operating Temperature | 0 to +55 °C |
| Storage Temperature | -25 to +70 °C |
| Protection Rating | IP20 |
| Dimensions (H×W×D) | 99 × 12.5 × 75 mm |
| Weight | 0.025 kg |
| Compatible Platforms | Modicon M241, M251, M258, LMC058 |
| Lifecycle | Active |
Range: ±10 V / 0-20 mA. Linearity: 12-bit resolution supports smooth analog control. Frequency response: sampling at 200 µs. Sensitivity: suited to low-level analog signals. Temperature range: 0 to +55 °C operating. Environmental tolerance: IP20 for clean industrial cabinets. Noise immunity: 500 Vrms AC isolation between channels and bus.
Installation Guide
- Mount the TM5SAO2L on a TM5 bus rail.
- Use 24 Vdc from the bus. No separate supply needed.
- Configure each channel as ±10 V or 0-20 mA in software.
- Keep wiring short to reduce noise.
- Respect IP20 limits. Use a clean cabinet.
Commissioning and Maintenance
Check ModuleOK, DcOk, and NetworkOk LEDs after power-up. Because the 1 ms response time and 200 µs sampling are fast, loop tuning becomes straightforward. Also, you can replace modules without changing field wiring. As a result, the 0.025 kg weight and 12.5 mm width save panel space.
Compatibility Notes
This module works with Modicon M241, M251, M258, and LMC058 controllers. It belongs to the Modicon TM5 distributed I/O platform. Therefore, use it with M258, M340, and M580 systems where TM5 I/O is supported.
Diagnostics
The module reports ModuleOK, DcOk, and NetworkOk status. These LEDs help you find power, bus, and network faults fast. Consequently, no extra diagnostic tools are required.
Typical Applications
- Valve and actuator control
- Analog drive speed reference
- Process control loops
- Distributed I/O in machinery
- Retrofit of obsolete control systems
Why Buy From Oiltech Controls?
With 15+ years of industrial automation spare parts experience, we support demanding projects. Worldwide shipment goes through FedEx, UPS, and DHL. Tested industrial surplus and refurbished options are available. A 12-month warranty covers every order. Before shipment, we verify technical details. Obsolete control systems also get our support.
For inquiries: info@oiltechcontrols.com or +86 158 8020 0923 (WhatsApp).
Packing List and Warranty
- 1 × TM5SAO2L analog output module
- Documentation not included unless stated
- 12-month warranty
- Shipping via FedEx, UPS, or DHL
Certifications
This module follows Schneider Electric Modicon TM5 standards. It carries the usual CE and UL marks for industrial control equipment. However, check local rules for your panel.
FAQ
Q: Can I mix voltage and current on the two channels?
A: Yes. Each channel is software configurable.
Q: Does it need a separate 24 V supply?
A: No. It uses the TM5 bus for 24 Vdc.
Q: What is the resolution?
A: 12 bits.
Q: How fast does the output change?
A: 1 ms max. Response time.
Q: Is isolation provided between channels?
A: No channel-to-channel isolation. 500 Vrms AC between channels and bus.
Q: What platforms support this module?
A: Modicon M241, M251, M258, LMC058.
Q: What is the warranty?
A: 12 months.
Q: How do you ship?
A: FedEx, UPS, DHL.
Copyright © 2026 Oiltech Controls Limited. All rights reserved.
Original Source: https://www.oiltechcontrols.com/
Reviews
There are no reviews yet.