TM5SDO4T Discrete Output Module – Modicon TM5 Series
Compact 4-channel transistor output module for Modicon M258, LMC058, and PacDrive controllers. Provides 24 V DC source outputs, 0.5 A per channel, with short-circuit and overload protection. Ideal for high-speed switching and actuator control in industrial automation systems.
Key Technical Specifications
- Brand: Schneider Electric / Modicon
- Model: TM5SDO4T
- Series: Modicon TM5 – distributed I/O system
- Type: Discrete output module, transistor (source)
- Outputs: 4 channels, 24 V DC, 0.5 A per channel
- Max common current: 2 A per output common
- Switching frequency: ≤ 500 Hz (resistive load)
- Response time: ≤ 300 µs (both ON→OFF and OFF→ON)
- Protection: Reverse polarity, short-circuit, overload
- Isolation: 500 Vrms (channel to bus); no isolation between channels
- Voltage drop: < 0.3 V at 500 mA (output); < 2 V at 500 mA (sensor supply)
- Leakage current: ≤ 5 µA (OFF state)
- Power dissipation: 0.86 W max
- Current consumption: 20 mA @ 24 V DC; 32 mA @ 5 V DC bus
- Sensor supply current: 500 mA max
Environmental & Mechanical
- Operating temp: –10…55 °C (horizontal, no derating); –10…60 °C (with derating); –10…50 °C (vertical)
- Storage temp: –40…70 °C
- Humidity: 5…95 % RH (non‑condensing)
- Protection: IP20 (IEC 61131‑2)
- Pollution degree: 2 (IEC 60664)
- Vibration: 1 gn @ 8.4…150 Hz; 3.5 mm @ 5…8.4 Hz (DIN rail)
- Shock: 15 gn / 11 ms
- Weight: 0.025 kg
- Colour: White
Compatibility & Integration
- Fully compatible with Modicon M258, LMC058, and PacDrive LMC (Pro 2, Pro, Eco) controllers.
- Also supports Logic Controllers and Motion Controllers from the same family.
- 3‑wire electrical connection, easy to integrate into existing TM5 I/O racks.
- Local diagnostics via 4 yellow LEDs (output status) and 2 green/red LEDs (power).
Diagnostic Capabilities
- Individual output status indication (yellow LEDs).
- Power supply healthy (green LED) and fault (red LED) indicators.
- Short‑circuit and overload protection with automatic recovery.
- Reverse polarity protection prevents damage from wiring errors.
- Fast response time (≤300 µs) enables precise control in time‑critical applications.
Installation & Maintenance
- Snap‑on DIN rail mounting (horizontal or vertical).
- No derating needed up to 55 °C (horizontal).
- Removable terminal blocks for quick wiring and replacement.
- Clear colour‑coded labels and LED diagnostics simplify troubleshooting.
- Compact design (2 x 6 x 10.5 cm) saves cabinet space.
Certifications & Standards
- IEC 61131‑2 (programmable controllers – equipment requirements)
- UL 508, CSA C22.2 No. 213 & No. 142
- Certified: CSA, GOST‑R, cULus, C‑Tick
- EMC compliant with EN/IEC 61000‑4‑2, ‑3, ‑4, ‑5, ‑6 and CISPR 11
- CE marked for European market
Typical Applications
- Actuator control (solenoids, valves, contactors).
- Signal lamps and indicator panels.
- Small motor starters and relay coils.
- Factory automation, packaging lines, and material handling.
- Motion control auxiliary outputs in PacDrive systems.
Frequently Asked Questions (FAQ)
- Q: Can I use this module with Modicon Quantum?
A: No. TM5SDO4T is designed for TM5 distributed I/O system. For Quantum, please check Modicon Quantum series. - Q: What is the maximum switching frequency?
A: 500 Hz for resistive loads. Derating may apply for inductive loads. - Q: Is the module hot‑swappable?
A: Yes, TM5 modules support hot‑swap under the controller’s supervision. - Q: How do I know if the output is short‑circuited?
A: The red power LED will flash, and the corresponding output LED turns off. Protection will auto‑reset after fault removal. - Q: Does it support sinking outputs?
A: No. This is a source (PNP) output module.
Why Buy From Oiltech Controls?
- Over 15 years of expertise in industrial automation spare parts.
- Global shipping supported – we deliver worldwide via FedEx, UPS, DHL.
- All products are technically verified before shipment – no surprises.
- We offer tested surplus / refurbished options with full function guarantee.
- 12‑month warranty on every module – peace of mind included.
- We support obsolete control systems – keep your legacy lines running.
Contact us: info@oiltechcontrols.com | +86 158 8020 0923 (WhatsApp)
Packaging includes: 1 x TM5SDO4T module, 1 x 3‑wire terminal block, product documentation (digital).
Shipping: FedEx, UPS, DHL – express delivery with tracking.
Warranty: 12 months from date of shipment against manufacturing defects.
SEO Meta Description: TM5SDO4T Modicon TM5 discrete output module, 4 DO, 24V DC 0.5A, transistor source. Technical specs, compatibility, diagnostics & global shipping from Oiltech Controls.
SEO Title 1: TM5SDO4T Modicon TM5 Output Module – 4 DO 24V 0.5A
SEO Title 2: Buy TM5SDO4T | Modicon TM5 Discrete Output Module
Copyright © 2026 Oiltech Controls Limited. All rights reserved.
Original Source: https://www.oiltechcontrols.com/










Reviews
There are no reviews yet.