1606-XLP100E Allen-Bradley Compact Power Supply, 24 V DC, 100 W
The 1606-XLP100E is a compact switched-mode power supply in the Allen-Bradley Bulletin 1606-XL line. It converts single-phase wide-range AC into a regulated 24 V DC output. Output adjusts from 24 to 28 V DC and delivers 4.2 A at 24.5 V, giving 100 W. Spring clamp terminals speed up wiring. The slim body mounts on DIN rail or directly on a wall. Typical efficiency reaches 90%. The unit remains active on the official Rockwell product page as of October 2026.
Short Description
Allen-Bradley 1606-XLP100E compact power supply, 100 W, 24 V DC, 4.2 A, single-phase 100 to 240 V AC. Spring clamp terminals, DIN rail or wall mount. 12-month warranty, 24 to 28 hour dispatch, FedEx UPS DHL.
Why Buy From Oiltech Controls?
- More than 15 years of industrial automation spare parts sourcing and application support
- Global shipment support through FedEx, UPS, and DHL
- Tested industrial surplus and refurbished options on select lines
- 12-month warranty covering every part we supply
- Technical verification before shipment on each order
- Support for obsolete control systems still in service
Electrical Performance
- Model: 1606-XLP100E
- Brand: Allen-Bradley
- Series: Bulletin 1606-XL
- Input voltage: 100 to 240 V AC nominal, single phase
- Output voltage: 24 V DC nominal, adjustable 24 to 28 V DC
- Output current: 4.2 A at 24.5 V
- Rated power: 100 W
- Efficiency: 90% typical
- Hold-up time: over 40 ms typical at 230 V AC
- Protection: no power boost
Hardware and Mechanical
- Mounting: DIN rail and wall mounting
- Connection: spring clamp terminals
- Dimensions (H×W×D): 75 × 73 × 103 mm body
- Weight: 0.36 kg
- Protection rating: IP20
- Approvals: UL 60950-1, cUL, CE marked
- Built-in ports: none. No communication interface
- Protocols: none
Environmental Limits
- Operating temperature: -10 °C lower bound. Upper bound not published numerically on the product page
- Storage temperature: -40 °C lower bound. Upper bound not published numerically on the product page
- Relative humidity: below 95%, non-condensing
- Keep the unit clear of corrosive gas, flammable gas, and heavy dust
Panel Fit and Wiring Notes
- Spring clamps cut wiring time. Use ferrules on stranded wire.
- Set output between 24 and 28 V DC before load connection.
- Leave free space above the body for natural convection.
- The 40 ms hold-up rides through short input dips at 230 V AC.
- No power boost means inductive loads need separate margin.
Where It Fits
- Compact panels with limited DIN rail depth
- Sensor, relay, and small PLC loads on a 24 V DC bus
- Machines fed from 100 to 240 V AC single phase
- Wall-mount sub-panels without rail space
- Spare stock programs for active Bulletin 1606 lines
Oiltech Controls Review
- The 1606-XLP100E packs 100 W into a 73 mm wide body. Good for tight cabinets.
- Spring clamp terminals hold well on stranded wire with ferrules.
- 90% efficiency keeps internal heat modest at full load.
- No power boost. Size inductive loads with care.
- Active status makes this a safe spare to hold, unlike many EOL 1606 parts.
Oiltech Controls Insight
- Set output to 24.5 V, not 24.0 V. It leaves headroom for line drop.
- Check the spring clamps after the first week. Vibration can loosen wire.
- The 40 ms hold-up helps during transfer switch events.
- Mount vertically for better convection on wall installs.
- Record the adjusted output voltage on the panel door card.
Warranty and Dispatch
- 12-month warranty on every unit supplied
- Dispatch within 24 to 28 hours after order confirmation
- Shipping by FedEx, UPS, and DHL
- Tracking number sent by email after dispatch
- Technical verification before shipment
FAQ
Q: Can the 1606-XLP100E output reach 28 V DC?
A: Yes. The trim pot adjusts output from 24 to 28 V DC. Current drops as voltage rises, so check your load margin at the higher setting.
Q: Does this unit have a communication port?
A: No. It has no built-in ports and no protocols. Remote monitoring needs external devices on the DC bus.
Q: What input wiring suits a spring clamp terminal?
A: Use stranded wire with ferrules, or solid wire. Strip about 8 mm. Push straight in and tug lightly to confirm the clamp holds.
Q: Is the upper operating temperature a concern?
A: The product page does not publish a numeric upper bound. Keep ambient below 60 °C as a practical rule. Add airflow in hot cabinets.
Q: Should I buy new or refurbished for a spare?
A: This model is still active, so new stock is available. Refurbished units suit budget spares. Either way, confirm test data and the 12-month warranty before ordering.
Contact Us
Email: info@oiltechcontrols.com
WhatsApp: +86 158 8020 0923
Copyright © 2026 Oiltech Controls Limited. https://www.oiltechcontrols.com/ All rights reserved.
All rights reserved.
Reviews
There are no reviews yet.