1762-IF4 Allen-Bradley MicroLogix 1200 Analog Input Module 4-Channel

1762-IF4 Analog Input Module – Allen‑Bradley MicroLogix 1200

4 differential inputs for current (4‑20 mA) or voltage (±10 VDC). Compact, bus‑powered module for MicroLogix 1100/1200/1400 controllers. Delta‑Sigma converter with 15‑bit resolution ensures accurate signal acquisition in harsh industrial environments.

Product Description

The 1762‑IF4 is a four‑channel analog input module from Rockwell Automation’s MicroLogix family. It accepts voltage (–10.5…+10.5V DC) and current (4…20 mA, full scale –21…+21 mA) signals. Each channel is individually configurable via DIP switches. The module communicates over the 1762 bus using a flat ribbon cable and requires only 5‑24V DC from the controller.

Designed for DIN rail or panel mounting, it supports 2‑, 3‑, or 4‑wire transmitters. The field‑upgradable flash OS keeps firmware current without hardware replacement. With IP20 rating, it suits dry, non‑hazardous locations (overvoltage Category II).

Technical Specifications

Installation & Maintenance

• Mounting: DIN rail or panel – use supplied clips.
• Wiring: Use shielded cable (Belden 8761) for noise reduction.
• Configuration: DIP switches set per‑channel current/voltage.
• Diagnostics: Single LED status indicator for power & fault.
• Maintenance: Remove power before handling; ESD protection required.
• Upgrade: Field‑flashable OS – no hardware change needed.

Compatibility & Expansion

• MicroLogix 1100: up to 4 expansion modules
• MicroLogix 1200: up to 6 expansion modules
• MicroLogix 1400: up to 7 expansion modules
• Connects via ribbon cable to 1762 bus (5‑24V DC)
• Supports 2‑, 3‑, or 4‑wire transmitter configurations

Typical Applications

• Process monitoring (pressure, flow, level) with 4‑20 mA transmitters
• Voltage signal acquisition from sensors (±10V DC output)
• Retrofit of legacy analog loops in Modicon Quantum systems
• PID control loops requiring high‑resolution input
• Remote I/O expansion for distributed control

Diagnostic Capabilities

• Over‑range / under‑range detection per channel
• Open‑circuit and short‑circuit indication
• Status LED for module health
• Data formatting: Raw/Proportional or Scale for PID

FAQ – Quick Answers

• Can I mix voltage and current on different channels? Yes – each channel is independently configurable via DIP switches.
• What cable is recommended? Belden 8761 shielded cable.
• Does it support 2‑wire transmitters? Yes, also 3‑wire and 4‑wire.
• Is the module compatible with MicroLogix 1400? Yes, and up to 7 modules can be stacked.
• What is the warranty? 12 months (parts & labour).

What’s in the Box

• 1762‑IF4 analog input module
• Finger‑safe terminal block cover
• DIN rail mounting clips
• Quick‑start guide (not full manual)

Certifications

• CE, UL, cUL, Class I Div 2 (hazardous locations)
• RoHS compliant
• IP20 enclosure rating

Why Buy From Oiltech Controls?

• 15+ years in industrial automation spares
• Global shipping – FedEx, UPS, DHL
• Tested industrial surplus & refurbished options
• 12‑month warranty on all products
• Technical verification before dispatch
• Support for obsolete control systems

Contact: info@oiltechcontrols.com  |  +86 158 8020 0923 (WhatsApp)

Copyright © 2026 Oiltech Controls Limited. All rights reserved.
Original Source: https://www.oiltechcontrols.com/