Bently Nevada 3300 Proximity Probe 146054-08-90-01-00 with ClickLoc Connector

Bently Nevada 146054-08-90-01-00 | 3300 Ceramic Capped Proximity Probe

• 146054-08-90-01-00 supports accurate shaft position and vibration monitoring.
• This probe suits turbines, compressors, motors, and pumps.
• Brand-new, factory-sealed condition ensures trusted performance.
• Factory warranty covers 12 months of normal use.

Design Highlights

• Ceramic probe tip protects against heat and mechanical wear.
• ClickLoc connector allows fast and secure cable connection.
• Long 9-meter cable simplifies routing in large machines.

Ordering Code Structure

• 146054-AA-BB-CC-DD
  • 146054
    • 3300 ceramic capped probe, 3/8-24 UNF thread
  • -08
    • Probe case length: 0.8 inch
  • -90
    • Total probe length: 9.0 meters (29.5 feet)
  • -01
    • Miniature coaxial ClickLoc connector with protector
  • -00
    • No agency approval required

Measurement Performance

• System Type: Bently Nevada 3300 5 mm system
• Linear Range: 0.25 to 1.78 mm
• Effective Span: 1.52 mm (60 mils)
• Output Signal: -4 Vdc to -16 Vdc
• Scale Factor: 7.87 V/mm (200 mV/mil)
• Accuracy: ±6.5% across full range

Electrical Characteristics

• Nominal Resistance: 9.87 Ω ±0.90 Ω
• Cable Impedance: 75 Ω coaxial
• Insulation Type: FEP for thermal stability
• Signal Stability: Low noise under industrial EMI

Mechanical and Environmental Limits

• Probe Tip: Alumina ceramic (Al₂O₃)
• Housing: AISI 304 stainless steel
• Thread: 3/8-24 UNF
• Max Thread Engagement: 0.563 inch
• Operating Temperature: -51°C to +177°C
• Pressure Seal: 34 bar (500 psi)

Temperature Classification Overview

• EPL Ga / Gc
  • T1 to T5, depending on ambient temperature limits
• EPL Dc
  • Supports T280°C to T90°C classifications

Installation Tips

• Set initial probe gap near mid linear range.
• Secure the ClickLoc connector to prevent vibration loosening.
• Protect the cable from sharp bends and hot surfaces.

Packaging and Delivery

• One probe packed in original factory packaging.
• Fast global shipping via FedEx, UPS, or DHL.

Professional FAQ

• Why choose a ClickLoc connector?
  • It reduces installation time and improves connection reliability.
• Is this probe suitable for retrofit projects?
  • Yes, it fits standard 3/8-24 UNF mounting points.
• What affects long-term measurement stability?
  • Stable gap settings and clean target surfaces improve accuracy.
• Can this probe work without hazardous approvals?
  • Yes, it suits general industrial areas without zoning limits.
• How do I confirm cable compatibility?
  • Match the probe with standard 3300 series extension cables.

Contact Information

• Email: info@oiltechcontrols.com
• WhatsApp: +86 158 8020 0923

Copyright © 2025 Oiltech Controls Limited. All rights reserved.

Original Source: https://www.oiltechcontrols.com/

Partner PLCDCS HUB Limited

All rights reserved.