Bently Nevada 330930-060-00-05 – 3300 NSv Extension Cable
Product Overview
Designed for 3300 XL NSv Proximitor Sensors. Precision 75 Ω coaxial cable with FEP insulation. Provides reliable signal transmission in harsh environments. Matches total length with probe for accurate proximity measurements.
Key Technical Data
- Brand: Bently Nevada
- Model: 330930-060-00-05
- Series: 3300 NSv
- Type: Extension Cable
- Cable Length: 6.0 m (19.7 ft)
- Connector Option: Without stainless steel armor
- Agency Approval: Multiple Approvals (Option 05)
- Material: 75 Ω coaxial, FEP insulated
- Temperature Range: -51 °C to +177 °C (-60 °F to +351 °F)
- Linear Range: 1.5 mm (60 mils) from 0.25 to 1.75 mm
- Recommended Gap: 1.0 mm (40 mils)
- DC Resistance (center): 0.220 Ω/m
- DC Resistance (shield): 0.066 Ω/m
- Capacitance: 69.9 pF/m (typical)
- Tensile Strength: 220 N (50 lb) at connectors
- Connector Material: Gold-plated brass
Performance & Environmental Specifications
- Measurement Range: 1.5 mm (60 mils) linear range
- Frequency Response: Refer to graphs for signal rolloff at high frequencies
- Sensitivity: Consistent with Proximitor Sensor calibration
- Linearity: ±1% typical over linear range
- Resolution: High resolution for shaft vibration monitoring
- Temperature Tolerance: Wide -51 °C to +177 °C
- Environmental Resistance: FEP insulation, optional SST armor
- Interference Immunity: Shielded coaxial design minimizes noise
Installation & Field Wiring
- Total length = probe length + extension cable length.
- Field wiring: 0.2 to 1.5 mm² (16–24 AWG).
- Use 3-conductor shielded triad cable for best performance.
- Max wiring length: 305 m (1,000 ft) between sensor and monitor.
- Check frequency response for long cable runs.
Compatibility & Diagnostics
- Compatible with 3300 XL NSv Proximitor Sensors.
- Works with Bently Nevada monitoring systems.
- Typical applications: Turbine vibration, compressor monitoring.
- Diagnostic capability: Early fault detection through proximity.
Certifications & Packaging
- Certification: Multiple Approvals (Option 05).
- Packaging: Factory sealed, anti-static packaging.
- Warranty: 12-month limited warranty against defects.
Why Buy From Oiltech Controls?
- Over 15 years of industrial automation parts expertise.
- Worldwide shipping with FedEx, UPS, and DHL.
- Tested surplus and refurbished options available.
- 12-month warranty on all products.
- Technical verification before every shipment.
- Support for obsolete control systems.
Frequently Asked Questions
- What is the total length rule? Probe + cable = Proximitor total length.
- Can I use this with other sensors? Designed specifically for 3300 XL NSv.
- Is armor optional? Yes, this model is without stainless steel armor.
- What is the gap setting? Recommended 1.0 mm (40 mils).
- How to handle temperature extremes? Rated -51 °C to +177 °C.
Contact & Shipping
For inquiries: info@oiltechcontrols.com
WhatsApp: +86 158 8020 0923
Shipping: FedEx, UPS, DHL – global express delivery.
Copyright © 2026 Oiltech Controls Limited. All rights reserved.
Original Source: https://www.oiltechcontrols.com/
Reviews
There are no reviews yet.