DL100-12AA2101 SICK Dx100 SSI Laser Sensor 130m ASRS

DL100-12AA2101 SICK Dx100 Standard SSI Laser Distance Sensor

Model: DL100-12AA2101
Brand: SICK
Series: Dx100 Standard
Part Number: 1059963

The SICK DL100-12AA2101 is a phase-shift optical time-of-flight laser distance sensor. It belongs to the Dx100 Standard sub-series. This unit measures up to 130 m on Diamond Grade reflective tape. It outputs position via SSI (Synchronous Serial Interface) in Gray or Binary code. The device reaches ± 2 mm to ± 3 mm accuracy with 0.5 mm repeatability. It tracks at 15 m/s and accelerates at 15 m/s². Therefore, it suits automated storage and retrieval systems (ASRS) and high-bay crane positioning.

Technical Data

• Brand: SICK
• Model: DL100-12AA2101
• Series / Family: Dx100 / Dx100 Standard
• Part Number: 1059963
• Measurement Principle: Phase Shift Optical Time-of-Flight Laser Distance Measurement
• Measuring Range: 0.15 m to 130 m on Diamond Grade reflective tape
• Light Source: Visible red laser diode, 658 nm, Class 2 (IEC 60825-1:2014), average power < 1 mW
• Laser Class: Class 2 (IEC 60825-1:2014, EN 60825-1:2014)
• Measurement Cycle: ≥ 1 ms internal rate; fieldbus cycle dependent
• Repeatability: 0.5 mm to 1 mm (typical 0.5 mm at 1 σ)
• Accuracy: Typ. ± 2 mm to ± 3 mm
• Max Tracking Velocity: 15 m/s
• Max Acceleration: 15 m/s²
• Communication Interface: SSI (Synchronous Serial Interface, Gray / Binary code); 2x push-pull digital outputs (PNP/NPN, configurable B/Q, ≤ 100 mA); multifunctional input (MF)
• Supply Voltage: DC 18 V to 30 V (reverse-polarity protected; limit values)
• Power Consumption: Typ. 8 W to 10 W
• Electrical Connection: Power: male M12 4-pin (A-coded, SPEEDCON™); SSI bus: female M12 8-pin
• Operating Temperature: -20 °C to +55 °C
• Storage Temperature: -40 °C to +75 °C
• Protection Rating: IP65 (EN 60529)
• Dimensions (W x H x D): 69.4 mm x 82.5 mm x 100.2 mm
• Housing: Aluminum die-cast with acrylic glass (PMMA) optical window
• Weight: Approx. 800 g

Installation and Alignment

• Use the optical 3-axis alignment bracket for precise beam setup.
• Keep the laser beam perpendicular to Diamond Grade tape.
• Protect the PMMA window from direct sunlight and heavy dust.
• Connect power via M12 4-pin A-coded male connector.
• Connect SSI bus via M12 8-pin female connector.
• Verify reverse-polarity protection before power-up.
• Use the integrated LC display for menu navigation.

Commissioning and Maintenance

• Configure SSI code format (Gray or Binary) in the menu.
• Set digital outputs as PNP or NPN based on PLC input type.
• Use multifunctional input (MF) for external trigger or sync.
• Monitor signal level attenuation via LC display or SSI status.
• Track laser diode aging and temperature trends.
• Clean the PMMA window with a soft, lint-free cloth.
• Inspect connectors every 6 to 12 months in critical ASRS axes.

Compatibility and Integration

• Works with SSI master devices and PLC SSI modules.
• Supports Gray code and Binary code output.
• Digital outputs configurable as PNP or NPN.
• M12 connectors match standard industrial cordsets.
• Not directly compatible with PROFINET, EtherNet/IP, or Modbus TCP.
• Ideal as a drop-in replacement for obsolete Dx100 Standard units.
• Contact us for gateway options if your network uses Ethernet protocols.

Certifications

• Laser safety: Class 2 per IEC 60825-1:2014 and EN 60825-1:2014.
• Ingress protection: IP65 per EN 60529.
• CE and standard industrial declarations apply.
• Certificate copies available on request.

Package List and Warranty

• 1x SICK DL100-12AA2101 sensor
• 1x quick start guide
• 1x declaration of conformity
• Mounting accessories not included unless specified
• 12-month warranty against defects in materials and workmanship.
• Ships in 24 to 28 hours after payment confirmation.
• Shipping via FedEx, UPS, and DHL.

Typical Equipment and Applications

• Automated storage and retrieval systems (ASRS)
• High-bay warehouse stacker cranes
• Dynamic trolley and hoist positioning
• Logistics conveying and sorting lines
• Steel coil and metal plate handling
• Port and container gantry systems
• Obsolete control system retrofits

Diagnostic Capabilities

• Continuous signal level attenuation monitoring
• Laser diode aging tracking
• Internal temperature logging
• LC display shows live measurement values
• SSI status bits for alarm and warning
• Early detection of contamination or misalignment
• Supports predictive maintenance planning

Oiltech Controls Review and Insight

• The DL100-12AA2101 is a solid choice for SSI-based ASRS axes.
• It offers 130 m range without the complexity of Ethernet protocols.
• Engineers like the simple SSI Gray code output for legacy PLCs.
• The 15 m/s tracking speed matches modern high-speed cranes.
• Condition monitoring helps avoid sudden downtime.
• Oiltech Controls verifies each unit before shipment.
• We support obsolete Dx100 Standard systems with tested surplus options.

Why Buy From Oiltech Controls?

• 15+ years in industrial automation spare parts
• Global shipment support to your site
• Tested industrial surplus and refurbished options
• 12-month warranty on every unit
• Technical verification before shipment
• Support for obsolete control systems
• Inquiries: info@oiltechcontrols.com or +86 158 8020 0923 (WhatsApp)

FAQ

Q: What is the maximum measuring range of the DL100-12AA2101?

A: It measures up to 130 m on Diamond Grade reflective tape. For longer range, consider the DL100-22AA2212 at 200 m.

Q: Can I use this sensor with a PROFINET PLC?

A: No, this model uses SSI output. You need an SSI master module or a gateway. For PROFINET, choose the DL100-22AA2212.

Q: How do I choose between SSI and PROFINET Dx100 models?

A: Pick SSI for simple, fast point-to-point wiring with legacy PLCs. Pick PROFINET for networked diagnostics and modern control architectures.

Q: What should I check before ordering a replacement?

A: Confirm your existing part number, interface type, cable connector pinout, and measuring range. Also check if your PLC supports SSI Gray or Binary code.

Q: Does Oiltech Controls test the sensor before shipping?

A: Yes, we perform technical verification before shipment. We also offer a 12-month warranty and ship via FedEx, UPS, or DHL within 24 to 28 hours.

Contact: info@oiltechcontrols.com | +86 158 8020 0923 (WhatsApp)

Copyright © 2026 Oiltech Controls Limited. https://www.oiltechcontrols.com/ All rights reserved.