DL100-12HA2102 SICK Dx100 Standard Laser Sensor 130 m PROFIBUS Heated

DL100-12HA2102 SICK Dx100 Standard Laser Distance Sensor

The SICK DL100-12HA2102 belongs to the Dx100 DL100 Standard family. It measures distance by phase shift optical time-of-flight. The sensor reaches up to 130 m on Diamond Grade reflective tape. It speaks PROFIBUS DP at up to 12 Mbit/s. An internal heating system keeps the optics clear down to -40 °C. This makes it a solid choice for cold storage, ASRS cranes, and outdoor transport lines. The LC display and optical 3-axis alignment aid speed up commissioning on site.

Technical Data

• Brand: SICK
• Model: DL100-12HA2102
• Series: Dx100 DL100 Standard
• Part Number: 1059966
• Measuring Range: 0.15 m … 130 m on Diamond Grade reflective tape
• Light Source: Red laser diode, 658 nm, Class 2, average power < 1 mW
• Measurement Cycle: ≥ 1 ms internal rate; fieldbus cycle dependent
• Repeatability: 0.5 mm … 1 mm; typical 0.5 mm at 1 σ
• Accuracy: Typ. ± 2 mm … ± 3 mm
• Tracking Velocity: Up to 15 m/s
• Acceleration: Up to 15 m/s²
• Fieldbus: PROFIBUS DP per EN 50170, up to 12 Mbit/s
• Auxiliary Outputs: 2x push-pull PNP/NPN, configurable B/Q, ≤ 100 mA
• Supply Voltage: DC 18 V … 30 V, reverse-polarity protected
• Power Consumption: Typ. 25 W … 35 W with heater active
• Operating Temperature: -40 °C … +55 °C with heating system
• Storage Temperature: -40 °C … +75 °C
• Protection Rating: IP65 per EN 60529
• Dimensions: 69.4 mm x 82.5 mm x 100.2 mm
• Weight: Approx. 1,000 g

Connectors and Wiring

• Power: male M12 4-pin
• PROFIBUS In/Out: 2x female M12 5-pin, B-coded, SPEEDCON
• Multifunctional input MF available for external triggers
• Reverse-polarity protection on the supply input
• Use shielded PROFIBUS cable for noisy cabinets

Mounting Notes

• Fix the sensor on a rigid bracket to avoid vibration drift.
• Align the laser beam square to the reflective tape.
• Use the optical 3-axis alignment aid for fast setup.
• Keep the PMMA window free from dust, ice, and condensation.
• Allow clearance for the M12 connectors on both sides.
• Check the PROFIBUS termination at both bus ends.

Setup and Service

• Navigate parameters through the integrated LC display.
• Set node address and baud rate before bus connection.
• Monitor signal level and temperature in the menu.
• Clean the optical window with a soft, damp cloth.
• Avoid solvents and abrasive pads on the PMMA surface.
• Inspect connectors during scheduled shutdowns.

Compatibility

• Works with PROFIBUS DP masters and standard GSD files.
• Fits SICK mounting brackets and alignment accessories.
• Configurable PNP/NPN outputs match common PLC input cards.
• SSI is not available on this model; use the DL100 Pro for SSI.
• Suits retrofit projects with existing PROFIBUS cabling.

Standards and Approvals

• Laser Class 2 per IEC 60825-1:2014 and EN 60825-1:2014
• Enclosure rating IP65 per EN 60529
• PROFIBUS DP per EN 50170

Inside the Box

• 1x SICK DL100-12HA2102 sensor
• 1x quick start guide
• 1x declaration of conformity
• Protective shipping packaging

Warranty, Lead Time, and Shipping

• 12-month warranty on eligible units
• Dispatch within 24 to 28 hours after order confirmation
• Shipping by FedEx, UPS, and DHL
• Tracking number sent after dispatch
• Export packing for long transit routes

Where It Fits

• Automated storage and retrieval systems ASRS
• Cold storage and freezer warehouses down to -40 °C
• Stacker cranes, shuttles, and transfer cars
• Overhead cranes and trolley positioning
• Outdoor gantry and monorail transport lines
• Retrofit of legacy PROFIBUS motion systems

Diagnostics

• Signal level attenuation monitoring
• Laser diode aging tracking
• Internal temperature readout
• Heater status feedback
• PROFIBUS communication diagnostics
• Fault codes on the LC display

Oiltech Controls Review and Insight

Oiltech Controls supplies industrial automation spare parts to maintenance teams, system integrators, and OEM retrofitters. The DL100-12HA2102 is a strong fit when a PROFIBUS DP line needs long-range positioning and cold-room operation. The built-in heater removes the need for external enclosures in freezer aisles. The 130 m range covers most ASRS and crane travel lengths without extra reflectors.

Which Equipment Suits This Sensor

• ASRS stacker cranes with PROFIBUS DP controls
• Freezer warehouse shuttles and transfer cars
• Overhead cranes on long runways
• Monorail and gantry systems in cold climates
• Legacy PROFIBUS motion systems needing drop-in replacement

Why Buy From Oiltech Controls?

• Over 15 years of industrial automation spare parts experience
• Global shipment support with FedEx, UPS, and DHL
• Tested industrial surplus and refurbished options
• 12-month warranty on eligible products
• Technical verification before every shipment
• Support for obsolete control systems and legacy platforms

FAQ

Q: Can this sensor work in a freezer at -40 °C?

A: Yes. The internal heating system keeps the optics clear down to -40 °C. Power consumption rises to 25 W … 35 W when the heater runs.

Q: Does the DL100-12HA2102 support SSI or PROFINET?

A: No. This model uses PROFIBUS DP only. For PROFINET IO or SSI, choose the DL100 Pro version such as the DL100-22AA2213.

Q: How do I choose between the Standard and Pro versions?

A: Pick the Standard version for PROFIBUS DP and cold storage. Pick the Pro version for PROFINET IO plus SSI and 200 m range. Match the fieldbus to your existing PLC network first.

Q: What causes weak signal or unstable readings?

A: Common causes include dirty optics, misalignment, wrong reflective tape, and strong ambient light. Check the signal level in the LC display and clean the PMMA window.

Q: What should I check before ordering a replacement?

A: Note the part number 1059966, the fieldbus type, the cable connector style, and the mounting bracket. Confirm the range you need and whether the site runs below -20 °C.

Q: How fast does Oiltech Controls ship?

A: We dispatch most orders within 24 to 28 hours. We ship by FedEx, UPS, and DHL with tracking.

Contact us at info@oiltechcontrols.com or +86 158 8020 0923 for stock checks and technical questions.

Copyright © 2026 Oiltech Controls Limited. https://www.oiltechcontrols.com/ All rights reserved.