SICK DL100-22HA2110 | High-Precision Long-Range Laser Distance Sensor
Brand: SICK
Model: DL100-22HA2110
Series: Dx100 DL100 Pro
Part Number: 1066431
Module Type: Phase Shift Optical Time-of-Flight Laser Distance Sensor
The SICK DL100-22HA2110 is a high-performance industrial laser distance sensor. It measures up to 200 m on Diamond Grade reflective tape. The sensor uses visible red laser light at 658 nm. It provides millimeter-level repeatability. The integrated heating system allows operation down to -40 °C. This sensor is ideal for automated storage and retrieval systems (ASRS). It supports EtherNet/IP with dual-port 100 Mbit/s and DLR.
Oiltech Controls supplies tested and verified industrial automation spare parts. We offer global shipment and technical support. Contact us at info@oiltechcontrols.com or +86 158 8020 0923 (WhatsApp).
Technical Specifications
| Brand | SICK |
| Model | DL100-22HA2110 |
| Series | Dx100 DL100 Pro |
| Part Number | 1066431 |
| Measurement Principle | Phase Shift Optical Time-of-Flight |
| Measuring Range | 0.15 m … 200 m (on Diamond Grade reflective tape) |
| Light Source | Visible red laser diode, 658 nm, Class 2 (IEC 60825-1:2014), < 1 mW |
| Laser Class | Class 2 (IEC 60825-1:2014, EN 60825-1:2014) |
| Output Time / Measurement Cycle | ≥ 1 ms (internal rate 1 ms, fieldbus cycle dependent) |
| Repeatability | 0.5 mm … 1 mm (typical 0.5 mm at 1 σ) |
| Measurement Accuracy | Typ. ± 2 mm … ± 3 mm |
| Max Tracking Velocity | 15 m/s |
| Max Acceleration | 15 m/s² |
| Frequency Response | Up to 1000 Hz (cycle time ≥ 1 ms) |
| Sensitivity | Optimized for Diamond Grade reflective tape |
| Linearity | Typ. ± 2 mm … ± 3 mm over full range |
| Resolution | 0.1 mm (internal) |
| Temperature Range (Operation) | -40 °C … +55 °C (integrated heating active) |
| Temperature Range (Storage) | -40 °C … +75 °C |
| Enclosure Protection Rating | IP65 (EN 60529) |
| Dimensions (W x H x D) | 69.4 mm x 82.5 mm x 100.2 mm |
| Housing Material | Aluminum die-cast with acrylic glass (PMMA) optical window |
| Weight | Approx. 1,000 g |
| Supply Voltage | DC 18 V … 30 V (reverse-polarity protected) |
| Power Consumption | Typ. 25 W … 35 W (internal heating element active) |
| Communication Interface | EtherNet/IP (Dual-port 100 Mbit/s, DLR supported) |
| Auxiliary Digital Outputs | 2x Push-Pull (PNP/NPN, configurable B/Q, ≤ 100 mA) |
| Multifunctional Input | MF input available |
| Electrical Connection | Power: Male M12 4-pin; Ethernet: 2x Female M12, 4-pin (D-coded, SPEEDCON™) |
| Display | Integrated LC display with intuitive menu navigation |
| Alignment | Optical 3-axis alignment bracket compatibility |
Key Features
- High-precision dynamic positioning up to 200 m on Diamond Grade reflective tape.
- EtherNet/IP dual-port 100 Mbit/s with DLR support.
- High dynamic acceleration up to 15 m/s² and tracking velocity up to 15 m/s.
- Integrated LC display with intuitive menu navigation.
- Optical 3-axis alignment bracket compatibility.
- Integrated internal heating system for cold-storage facilities down to -40 °C.
- Robust aluminum die-cast housing with PMMA optical window, IP65.
Typical Applications
- Automated storage and retrieval systems (ASRS)
- Cold-storage facility positioning
- High-bay warehouse crane positioning
- Long-range distance measurement in industrial automation
- Dynamic positioning on reflective tape
Installation Guide
- Mount the sensor using the optical 3-axis alignment bracket.
- Connect power via M12 4-pin male connector.
- Connect Ethernet via 2x M12 4-pin D-coded female connectors.
- Ensure supply voltage is within DC 18 V … 30 V.
- Align the laser beam to the Diamond Grade reflective tape.
- Use the integrated LC display for menu navigation and fine-tuning.
Commissioning and Maintenance
- Use the LC display for quick parameter setup.
- Check optical window regularly for dust or debris.
- Clean the PMMA window with a soft, damp cloth.
- Verify heating system operation in cold environments.
- Confirm EtherNet/IP communication via DLR or standard switch.
- No moving parts inside, reducing mechanical wear.
Compatibility
- EtherNet/IP fieldbus networks with DLR support.
- M12 4-pin power and Ethernet connectors (D-coded).
- Optical 3-axis alignment bracket (SICK accessory).
- Compatible with standard industrial automation controllers.
- Works with Diamond Grade reflective tape.
Certifications
- Laser Class 2: IEC 60825-1:2014, EN 60825-1:2014
- Enclosure Protection: IP65 per EN 60529
- EtherNet/IP conformance tested
Diagnostic Capabilities
- Integrated LC display shows status and error codes.
- EtherNet/IP diagnostics via fieldbus.
- Optical alignment feedback through display.
- Signal quality indication for reflective tape.
- Temperature and heating status monitoring.
Package List
- 1x SICK DL100-22HA2110 sensor
- 1x Quick start guide (digital or printed)
- 1x Declaration of conformity
- Protective caps for M12 connectors
Warranty and Shipping
12-month warranty covers functional defects. We ship via FedEx, UPS, and DHL. Tracking number provided after dispatch. Contact info@oiltechcontrols.com for shipping quotes.
Why Buy From Oiltech Controls?
- 15+ years of industrial automation spare parts experience.
- Global shipment support with reliable logistics partners.
- Tested industrial surplus and refurbished options available.
- 12-month warranty on all qualifying products.
- Technical verification before shipment ensures working condition.
- Support for obsolete control systems and legacy automation.
For inquiries, email info@oiltechcontrols.com or message us on WhatsApp: +86 158 8020 0923.
FAQ
Q: What is the maximum measuring range?
A: Up to 200 m on Diamond Grade reflective tape.
Q: Does this sensor work in cold storage?
A: Yes, with integrated heating down to -40 °C.
Q: What communication interface does it use?
A: EtherNet/IP with dual-port 100 Mbit/s and DLR support.
Q: What is the laser class?
A: Class 2 per IEC 60825-1:2014.
Q: Is the sensor easy to align?
A: Yes, it supports optical 3-axis alignment bracket and LC display.
Q: What is the warranty period?
A: 12 months from delivery date.
Q: How fast can it measure?
A: Internal cycle time ≥ 1 ms, fieldbus cycle dependent.
Q: Can it track moving targets?
A: Yes, up to 15 m/s tracking velocity and 15 m/s² acceleration.
Q: What is the repeatability?
A: Typically 0.5 mm at 1 σ.
Q: What is included in the package?
A: Sensor, quick start guide, declaration of conformity, and connector caps.
Copyright © 2026 Oiltech Controls Limited. All rights reserved.
Original Source: https://www.oiltechcontrols.com/
Reviews
There are no reviews yet.