DT50-2B415252 SICK Dx50-2 Next Generation Distance Sensor
The DT50-2B415252 belongs to the SICK Dx50-2 next generation family. It uses HDDM optical time-of-flight measurement. This sensor reads natural surfaces up to 20 m. Its measuring rate reaches 3 kHz. The dual interface combines IO-Link V1.1, push-pull switching, and analog output. The zinc die-cast body handles harsh plant conditions. The IP65 and IP67 ratings protect against dust and water. The operating range spans -40 °C to +65 °C without an internal heater.
Quick Specs
- Brand: SICK
- Model: DT50-2B415252
- Series: Dx50-2
- Part Number: 1086088
- Principle: HDDM optical time-of-flight
- Laser: 658 nm red, Class 2, < 1 mW
- Connection: M12 5-pin male
Measuring Performance
- Range at 90% remission: 200 mm to 20,000 mm
- Range at 18% remission: 200 mm to 8,000 mm
- Range at 6% remission: 200 mm to 4,000 mm
- Response time: 0.83 ms to 75 ms, configurable
- Repeatability: ≥ 0.5 mm to 5 mm
- Accuracy: Typ. ± 7 mm
- Measuring rate: Up to 3 kHz
Electrical Interface
- Digital output Q1: 1x push-pull PNP/NPN, IO-Link V1.1
- Analog output QA: 4 mA to 20 mA at ≤ 450 Ω, or 0 V to 10 V at ≥ 50 kΩ, 16-bit
- Input: Multifunctional input MF
- Supply: DC 10 V to 30 V, reverse-polarity protected
- Power draw: ≤ 2.1 W
Mechanical and Environment
- Operating temperature: -40 °C to +65 °C
- Storage temperature: -40 °C to +75 °C
- Protection: IP65 and IP67 per EN 60529
- Dimensions: 36.2 mm x 67.3 mm x 58 mm
- Housing: Zinc die-cast ZNAL4CU1, PMMA window
- Weight: Approx. 235 g
Best Fit Equipment
- AGV and AMR positioning loops
- Crane anti-collision systems
- Pallet and tote profile scanning
- Steel coil and roll diameter checks
- IO-Link based smart sensor networks
- Legacy Dx50 replacement on obsolete lines
Oiltech Controls’s Insight
The DT50-2B415252 targets engineers who need speed and flexible wiring. The 0.83 ms fast mode supports high-speed sorting. The dual interface cuts spare part count. One unit covers switching, analog, and IO-Link duties. The wide 18% and 6% remission ranges handle dark targets. The IP67 rating adds washdown confidence. This model suits retrofits where cabinet space is tight.
Why Buy From Oiltech Controls?
- Over 15 years in industrial automation spare parts
- Worldwide shipping through FedEx, UPS, and DHL
- Tested surplus and refurbished units available
- 12-month warranty on every order
- Technical check before each shipment
- Help with obsolete and discontinued control systems
Shipping and Warranty
- 12-month warranty covers functional defects
- Orders dispatch within 24 to 28 hours
- Carriers: FedEx, UPS, DHL
- Tracking number sent after pickup
Contact
- Email: info@oiltechcontrols.com
- WhatsApp: +86 158 8020 0923
FAQ
Q: Can the DT50-2B415252 replace an older Dx50 unit?
A: Yes, in most cases. Check the connector pinout and output type first. The M12 5-pin layout usually matches. IO-Link adds new functions, so review your PLC setup.
Q: Which speed setting should I choose?
A: Pick fast mode for sorting and edge detection. Choose slow mode for dusty or dark targets. Slow mode averages more samples and improves stability.
Q: Does it need a separate analog module?
A: No. The analog output is built in. You can select 4 mA to 20 mA or 0 V to 10 V. This saves wiring and cabinet space.
Q: How do I handle very dark objects?
A: Expect 4,000 mm range at 6% remission. Mount the sensor closer for dark rubber or black plastic. Clean the PMMA window often in dusty plants.
Q: Is a heater needed for cold plants?
A: No. The unit runs from -40 °C to +65 °C without a heater. This reduces power draw and failure points.
Copyright © 2026 Oiltech Controls Limited. https://www.oiltechcontrols.com/ All rights reserved.
Reviews
There are no reviews yet.