Yokogawa F3XD32-5F DC Input Module – 32-Point, 5 V DC, Sink/Source
The Yokogawa F3XD32-5F is a 32-point DC input module for Yokogawa F3 series PLC systems. It accepts sink or source DC voltage input. A photocoupler isolates each group from the bus. Eight common points divide the 32 inputs. You can set input sampling time and interrupt per point. This module suits fast discrete signal capture in legacy automation systems.
Technical Specifications
| Brand | Yokogawa |
| Model | F3XD32-5F |
| Series | F3 Series |
| Module Type | DC Input Module |
| Input Type | DC voltage, sink/source |
| Number of Inputs | 32 |
| Isolation | Photocoupler isolation |
| Rated Input Voltage | 5 V DC |
| Rated Input Current | 4.0 mA per point at 5 V DC |
| Operating Voltage Range | 4.5 to 5.5 V DC |
| ON Condition | 3.5 V DC min, 2.0 mA min |
| OFF Condition | 1.0 V DC max, 0.2 mA max |
| Input Response Time | OFF to ON and ON to OFF: selectable 5 steps — Always (0 μs), 62.5 μs, 250 μs, 1 ms, 16 ms |
| Simultaneous ON Ratio | 100% |
| External Connection | One 40-pin connector |
| Common Points | 8 points per common |
| Interrupt | Configurable per input point |
| Current Consumption | 75 mA at 5 V DC |
| Weight | 120 g |
| Operating Temperature | 0 to 55 °C |
| Storage Temperature | -20 to 75 °C |
| Operating Humidity | 10 to 90% RH, non-condensing |
| Storage Humidity | 10 to 90% RH, non-condensing |
| Atmosphere | Free of corrosive gases, flammable gases and heavy dust |
Measurement range and resolution: The module reads discrete DC levels, not analog values. ON/OFF thresholds define the effective detection window. Response time reaches 62.5 μs for high-speed capture. Linearity and sensitivity follow the fixed ON/OFF current thresholds. Temperature range and environmental tolerance meet standard F3 series limits. Noise immunity comes from photocoupler isolation and 8-point common grouping.
Installation Guide
- Mount the module in a Yokogawa F3 base unit slot.
- Keep the cabinet within 0 to 55 °C.
- Avoid corrosive gas, flammable gas and heavy dust.
- Wire field signals to the 40-pin connector.
- Respect the 8-point common grouping during wiring.
- Confirm sink or source wiring before power-up.
Setup and Maintenance Convenience
- Set sampling time in five steps per channel group.
- Enable interrupts on selected input points.
- Check the 75 mA current draw during commissioning.
- Photocoupler isolation simplifies fault tracing.
- No routine calibration is required.
Compatibility Notes
The F3XD32-5F fits Yokogawa F3 series racks. It uses a 5 V DC input level, so verify field device output levels first. The 40-pin connector matches standard F3 wiring practice. Confirm base unit and power supply compatibility before ordering. Contact our team for cross-reference checks on obsolete F3 systems.
Certifications and Packaging
Certification details vary by production batch. Request the certificate for your unit. Package contents: one Yokogawa F3XD32-5F module. Accessories ship only if listed. Warranty: 12 months. Shipping: FedEx, UPS and DHL. Lead time depends on stock status.
Typical Applications
- Legacy F3 PLC input expansion
- High-speed discrete signal capture
- Interrupt-driven event detection
- Panel signal monitoring in process plants
- Retrofit of obsolete control cabinets
Diagnostic Capability
Per-point interrupt settings help isolate fast events. The 8-point common layout narrows fault location. Photocoupler isolation limits cross-channel disturbance. ON/OFF threshold checks confirm signal health. Swap testing with a known-good module speeds diagnosis.
Why Buy From Oiltech Controls?
- 15+ years in industrial automation spare parts
- Global shipping through FedEx, UPS and DHL
- Tested surplus and refurbished options available
- 12-month warranty on every module
- Technical verification before each shipment
- Obsolete system support for legacy F3 platforms
FAQ
Q: Is the F3XD32-5F sink or source?
A: It supports both sink and source input wiring.
Q: How many inputs does it have?
A: 32 inputs, grouped in 8-point commons.
Q: Can I set response time?
A: Yes. Five steps range from 0 μs to 16 ms.
Q: Does it support interrupts?
A: Yes. You can set interrupts per point.
Q: What is the warranty?
A: 12 months from Oiltech Controls.
Q: How fast is shipping?
A: FedEx, UPS and DHL options ship worldwide.
Contact Us
Email: info@oiltechcontrols.com
Phone/WhatsApp: +86 158 8020 0923
Copyright © 2026 Oiltech Controls Limited. All rights reserved.
Original Source: https://www.oiltechcontrols.com/
All rights reserved.
Reviews
There are no reviews yet.