IV2-CP50 Control Panel for Keyence IV2 / IV Series Vision Sensors
The Keyence IV2-CP50 is a 5.7-inch touchscreen control panel built for IV2 and IV series vision sensors. It gives engineers a direct interface for setup, monitoring, and diagnostics. The unit uses a 640 x 480 VGA TFT color LCD with an analog resistive touch panel. It needs only 0.8 N or less actuating force. This makes operation fast and reliable on the factory floor.
The panel runs on 24 VDC +/-10% and draws 0.3 A or less. It supports M12 4-pin Ethernet and USB. Communication protocols depend on the connected sensor. There is no communication expansion slot. The housing is PC material with a white LED backlight rated for about 50000 hours at 25 C. Protection rating is IP40. It resists a 1.3 m drop onto concrete and vibration from 10 to 55 Hz at 0.7 mm double amplitude for 2 hours per axis.
This control panel is active and officially confirmed by Keyence production status as of 2026-09. It suits industrial automation users who need a durable, easy-to-mount HMI for vision sensor configuration. Oiltech Controls supplies tested units with a 12-month warranty and global shipping via FedEx, UPS, and DHL.
Technical Specifications
| Brand | Keyence |
| Model | IV2-CP50 |
| Series | IV2 Series |
| Type | Control panel |
| Display | 5.7-inch TFT color LCD, 640 x 480 (VGA) |
| Touch Panel | Analog resistive, actuating force 0.8 N or less |
| Backlight | White LED, approx. 50000 hours (25 C) |
| Built-in Ports | M12 4-pin Ethernet (100BASE-TX/10BASE-T), USB |
| Protocols | Via connected sensor |
| Communication Expansion | None |
| Supply Voltage | 24 VDC +/-10% (including ripple) |
| Power Consumption | 0.3 A or less |
| Operating Temperature | 0 to +50°C (no freezing) |
| Relative Humidity | 35 to 85% RH (no condensation) |
| Protection Rating | IP40 |
| Drop Resistance | 1.3 m onto concrete (2 times, any direction) |
| Vibration Resistance | 10 to 55 Hz, double amplitude 0.7 mm, 2 hours in each of X/Y/Z directions |
| Dimensions (H×W×D) | Not available |
| Weight | Approx. 450 g (main unit); approx. 485 g (with wall mounting adapter and stylus attached) |
| Material | Main unit case: PC. Power connector: Brass + Ni plating. Ethernet connector: Zinc + Ni plating / PA. USB connector cover: EPDM. Pen holder: PC. Adapter fixing hook: POM. LED lamp cover: PC. Mounting adapter: PC. Stylus: POM. |
| Lifecycle | Active; official Keyence production status confirmed via product/spec page (Last verified: 2026-09) |
Installation Guide
- Mount the panel using the wall mounting adapter or standard fixture.
- Connect 24 VDC power to the M12 4-pin power connector.
- Use the M12 4-pin Ethernet port for sensor communication.
- Attach the USB cable if data transfer is needed.
- Keep the unit within 0 to +50°C and 35 to 85% RH.
- Do not exceed 0.3 A current draw.
- Use the included stylus for precise touch input.
Commissioning and Maintenance Convenience
The analog resistive touchscreen works with gloves and stylus. It needs only 0.8 N force. The white LED backlight lasts about 50000 hours, reducing replacement downtime. The IP40 rating protects against solid objects over 1 mm. It is not waterproof. Clean the screen with a soft, dry cloth. Avoid solvents. The PC housing resists impacts and vibration. The 1.3 m drop resistance supports rugged handling. No communication expansion means fewer configuration steps. Maintenance is mostly visual inspection and connector checks.
Compatibility Notes
This panel works with Keyence IV2 series and IV series vision sensors. It communicates through the connected sensor. The M12 4-pin Ethernet port supports 100BASE-TX and 10BASE-T. No additional communication module is required or supported. The USB port allows local data access. Check sensor firmware compatibility before deployment. For obsolete control systems, contact Oiltech Controls for verification.
Certification Information
Keyence confirms the IV2-CP50 as an active product. It meets Keyence internal standards for industrial displays. The unit carries no specific third-party certification listed in this data. Always follow local electrical codes during installation. Oiltech Controls performs technical verification before shipment. This helps confirm function and condition.
Packaging List
- IV2-CP50 control panel main unit
- Wall mounting adapter
- Stylus
- Pen holder
- Adapter fixing hook
- Quick reference documentation (if supplied by Keyence)
Weight with adapter and stylus is approx. 485 g. Main unit weight is approx. 450 g. Dimensions are not available.
Warranty and Shipping
Oiltech Controls offers a 12-month warranty on this product. We ship worldwide via FedEx, UPS, and DHL. Each order gets technical verification before shipment. We support obsolete control systems and offer tested industrial surplus or refurbished options. Contact us for stock and lead time.
Typical Application Scenarios
- Vision sensor setup on IV2 and IV series cameras.
- Factory automation lines needing local HMI.
- Quality inspection stations with touch control.
- Retrofits for obsolete control systems.
- Packaging, automotive, and electronics assembly.
- Rugged environments with vibration and drop risk.
Diagnostic Capabilities
The IV2-CP50 shows sensor status and settings on its 5.7-inch VGA screen. Engineers can adjust parameters directly. The resistive touch panel responds to stylus or finger. Backlight life and power draw are predictable. The unit helps isolate sensor communication issues via Ethernet. It does not include advanced protocol analysis. For deep diagnostics, use the connected sensor software.
FAQ
Q: What sensors work with the IV2-CP50?
A: It supports Keyence IV2 and IV series vision sensors.
Q: Does it need external power?
A: Yes. Use 24 VDC +/-10% and keep current under 0.3 A.
Q: What is the protection rating?
A: IP40. It resists solid objects over 1 mm. It is not waterproof.
Q: How long does the backlight last?
A: About 50000 hours at 25 C.
Q: Can I use it with obsolete systems?
A: Yes. Oiltech Controls supports obsolete control systems. We verify compatibility before shipment.
Q: What is the warranty?
A: 12-month warranty from Oiltech Controls.
Q: How do you ship?
A: We use FedEx, UPS, and DHL for global delivery.
Why Buy From Oiltech Controls?
- 15+ years in industrial automation spare parts.
- Worldwide shipping support through FedEx, UPS, DHL.
- Tested industrial surplus and refurbished options.
- 12-month warranty on every eligible unit.
- Technical verification before shipment.
- Support for obsolete control systems.
Inquiries: info@oiltechcontrols.com or +86 158 8020 0923 via WhatsApp.
Copyright © 2026 Oiltech Controls Limited. All rights reserved.
Original Source: https://www.oiltechcontrols.com/
Reviews
There are no reviews yet.