MC07B0040-5A3-4-S0 SEW MOVITRAC B Inverter 4 kW

MC07B0040-5A3-4-S0 SEW MOVITRAC B Frequency Inverter, 4 kW, 3-Phase

The MC07B0040-5A3-4-S0 is a MOVITRAC B frequency inverter from SEW-EURODRIVE. It drives a 4 kW / 5.4 HP motor from a 380-500 VAC three-phase supply at 50/60 Hz. The unit is a 4Q drive with an integrated brake chopper. It carries C2 suppression and a Safe Stop function. The design suits panel builders who need fast braking and simple wiring. It fits conveyor, pump and fan duty with steady torque demand. The MC07B0040-5A3-4-S0 mounts in a standard cabinet and wires straight to the motor terminals. Settings are held in the drive, so a replacement unit returns to service without a PC. This part is a practical choice for lines that already run MOVITRAC B hardware.

Technical Data

• Brand: SEW-EURODRIVE
• Model: MC07B0040-5A3-4-S0
• Series: MOVITRAC B
• Part number: MC07B0040-5A3-4-S0
• Supply: 380-500 VAC, 3-phase, 50/60 Hz
• Motor power: 4 kW / 5.4 HP
• Braking: 4Q operation with brake chopper
• EMC: C2 suppression fitted
• Safety: Safe Stop input

Where It Fits

• Conveyor sections with frequent stops.
• Pumps and fans with variable flow demand.
• Packaging machines that need fast braking.
• Retrofits of older MOVITRAC B panels.
• Hoist and lift duty with a brake resistor.
• Lines that must keep a Safe Stop circuit.

Oiltech Controls’s Insight

• The brake chopper saves an external module on ramp-down duty.
• C2 suppression shortens EMC work in mixed cabinets.
• Check motor cable length before you mount the drive.
• Confirm the Safe Stop wiring matches your safety relay.
• Record the parameter set before you swap a unit.
• Ask us for a firmware and option check on your nameplate.

Oiltech Controls Review

• Engineers rate the MOVITRAC B for simple setup and clear terminals.
• The 4 kW frame covers most small conveyor and pump jobs.
• Brake chopper and Safe Stop reduce extra hardware cost.
• Spare units keep old lines running past end of life.
• Our test bench checks each unit before packing.
• We ship within 24-28 hours after payment clears.

Why Buy From Oiltech Controls?

• More than 15 years in industrial automation spares.
• We ship to most countries with FedEx, UPS and DHL.
• We stock tested surplus and refurbished units.
• Every part carries a 12-month warranty.
• We test and verify each unit before shipment.
• We keep obsolete control systems in service.

Order and Delivery

• Warranty: 12 months from delivery.
• Dispatch: within 24-28 hours.
• Couriers: FedEx, UPS and DHL with tracking.
• Packing: ESD bag, foam, carton and test note.

FAQ

Q: Can I run this drive on a 400 V supply?

A: Yes. The range is 380-500 VAC three-phase. Set the motor data to match the nameplate.

Q: Do I need an external brake resistor?

A: The chopper is built in. A resistor is still needed to burn off energy on fast stops.

Q: How do I move my parameters to a replacement unit?

A: Save the parameter set first. Then load it into the new drive and check the I/O map.

Q: What should I check before I buy a used unit?

A: Check frame size, supply class, Safe Stop wiring and brake chopper presence. Send us the nameplate photo.

Q: How fast will my order ship?

A: We dispatch in 24-28 hours by FedEx, UPS or DHL. You get tracking the same day.

Reach us at info@oiltechcontrols.com or on WhatsApp at +86 158 8020 0923.

Copyright © 2026 Oiltech Controls Limited. https://www.oiltechcontrols.com/ All rights reserved.

All rights reserved.