TM5SAI2L Schneider Electric Analog Input Module
The TM5SAI2L is a Modicon TM5 analog input module from Schneider Electric. It offers 2 channels with software configurable signal types. Each channel supports ±10 Vdc, 0-20 mA, or 4-20 mA. Resolution is 12 bits signed. Accuracy is ±0.3% of full scale at 25 °C. It runs on 24 Vdc via the TM5 bus. Power draw is 0.81 W. It mounts in compact cabinets at IP20. This module fits Modicon M241, M251, M258, and LMC058 platforms. It is ideal for precise process signal capture in factory automation.
Technical Data
| Brand | Schneider Electric |
| Model | TM5SAI2L |
| Series | Modicon TM5 |
| Module Type | Analog Input Module |
| Channels | 2 |
| Signal Type | ±10 Vdc, 0-20 mA, 4-20 mA (software configurable per channel) |
| Measurement Range | ±10 V / 0-20 mA / 4-20 mA |
| Resolution | 12 bits signed (±10V: -32768 to +32767) |
| Accuracy | ±0.3% FS at 25 °C, ±0.5% FS over temperature |
| Isolation | No isolation between channels; 500 Vrms AC between channels and bus |
| Response Time | Configurable input cycle, channel offset 200 µs, sampling 1 ms or 300 µs per channel |
| Supply Voltage | 24 Vdc via TM5 bus |
| Power Consumption | 0.81 W |
| Bus Current | 2 mA at 5 V DC; 5 mA at 24 V DC |
| Operating Temperature | 0 to +55 °C |
| Storage Temperature | -25 to +70 °C |
| Protection Rating | IP20 |
| Dimensions (H×W×D) | 99 × 12.5 × 75 mm |
| Weight | 0.025 kg |
| Compatible Platforms | Modicon M241, M251, M258, LMC058 |
| Lifecycle Status | Active (Last verified: 2026-09) |
Key Specifications
- Measurement Range: ±10 V, 0-20 mA, 4-20 mA
- Frequency Response: Configurable input cycle with filter off or level 2-128
- Sensitivity: 12-bit signed resolution
- Linearity: ±0.3% of full scale at 25 °C
- Resolution: 12 bits signed
- Temperature Range: 0 to +55 °C operating, -25 to +70 °C storage
- Environmental Tolerance: IP20, non-condensing industrial use
- Anti-interference Ability: 500 Vrms AC isolation between channels and bus
Diagnostic Capability
- Channel status for below lower limit
- Channel status for above upper limit
- Wire break detection for 4-20 mA
- ModuleOK status indicator
- DcOk status indicator
- NetworkOk status indicator
Typical Applications
- Process signal capture in factory automation
- Pressure and flow transmitter input
- Temperature sensor signal conditioning
- Valve position feedback
- Modicon M241 and M251 control panels
- Compact IP20 control cabinets
Installation Guide
- Mount on the TM5 bus rail in a dry cabinet.
- Keep ambient temperature between 0 and +55 °C.
- Use 24 Vdc supply through the TM5 bus.
- Configure each channel for voltage or current in software.
- Check wiring for 4-20 mA wire break detection.
- Maintain IP20 protection with a closed panel.
Setup and Maintenance Convenience
- Software configurable per channel saves setup time.
- Compact 12.5 mm width saves cabinet space.
- Low 0.81 W power draw reduces heat load.
- Clear diagnostics speed up fault finding.
- Light 0.025 kg weight makes replacement easy.
- Active lifecycle ensures long-term support.
Compatibility Notes
- Works with Modicon M241
- Works with Modicon M251
- Works with Modicon M258
- Works with LMC058
- Fits Modicon TM5 distributed I/O platform
- Check controller firmware before order
Certifications and Packaging
- Schneider Electric brand quality
- Active lifecycle status verified 2026-09
- Package includes 1 x TM5SAI2L analog input module
- Basic protective packing included
- Cables and manuals not included unless stated
- Ask for compliance documents before order
Warranty and Shipping
- Every order includes a 12-month warranty
- We ship by FedEx, UPS, and DHL
- Global shipment support available
- Technical verification before shipment
- Orders ship in 24-28 hours after payment
- Contact us for bulk lead time
Why Buy From Oiltech Controls?
- More than 15 years in industrial automation spare parts
- Worldwide shipping by FedEx, UPS, and DHL
- Tested industrial surplus and refurbished options
- 12-month warranty on every order
- Technical verification before shipment
- Support for obsolete control systems
FAQ
Q: How do I configure the TM5SAI2L channels?
A: Use the Modicon software to set each channel for ±10 V, 0-20 mA, or 4-20 mA. No hardware jumpers needed.
Q: Does this module support wire break detection?
A: Yes. It detects wire breaks on 4-20 mA channels. This helps find loose or cut sensor wires fast.
Q: What controllers work with this module?
A: It works with Modicon M241, M251, M258, and LMC058. Check firmware version before you order.
Q: How fast does the module sample signals?
A: Sampling is 1 ms or 300 µs per channel. The input cycle filter is configurable from off to level 128.
Q: How do I confirm stock and shipping?
A: Email info@oiltechcontrols.com or WhatsApp +86 158 8020 0923. We ship in 24-28 hours.
Contact Information
Inquiries: info@oiltechcontrols.com
Phone / WhatsApp: +86 158 8020 0923
Copyright © 2026 Oiltech Controls Limited. All rights reserved.
Original Source: https://www.oiltechcontrols.com/
Reviews
There are no reviews yet.