A06B-6087-H115 FANUC Power Converter 63 A 200-230 V | Oiltech Controls

A06B-6087-H115 FANUC Servo Power Supply | A06B Series | 63 A | 200-230 V

Product Overview

The A06B-6087-H115 is a FANUC servo power supply built for CNC systems, and it converts input power for servo drives. This unit belongs to the A06B product line. With a rated current of 63 A, it accepts 200-230 V AC or DC input. Because it uses air cooling, it mounts vertically or on a wall. It also protects against overload, overcurrent, and overvoltage. Operating from 0°C to 55°C, the unit reaches over 95% efficiency. In addition, it uses a 3-phase input and outputs 200-230 V AC or DC.

Technical Specifications

Measurement Range, Frequency Response, Sensitivity, Linearity, Resolution, Temperature Range, Environmental Tolerance, Noise Immunity

• Measurement Range: 200-230 V AC/DC input and output
• Frequency Response: 50/60 Hz operational stability
• Sensitivity: Fast response to current and voltage changes
• Linearity: Stable output across the rated current range
• Resolution: Precise servo power conversion for CNC control
• Temperature Range: 0°C to 55°C operating range
• Environmental Tolerance: Air-cooled design for industrial environments
• Noise Immunity: Integrated protection against overvoltage, overcurrent, and overload

Installation Guide

• First, mount the unit vertically or on a wall.
• Then, use a 3-phase input power source.
• Next, confirm input voltage is 200-230 V AC or DC.
• Also, keep airflow clear for air cooling.
• Moreover, ground the unit properly before power-on.
• Finally, check all connections before startup.

Commissioning and Maintenance Convenience

• Air cooling reduces maintenance needs.
• In addition, protection features lower risk of damage.
• Vertical or wall mounting also saves space.
• Furthermore, stable output supports fast commissioning.
• Clear terminal layout, meanwhile, helps wiring checks.

Compatibility Notes

• Designed for FANUC CNC systems.
• It also works with A06B series servo drives.
• Moreover, it fits systems needing 200-230 V AC/DC input.
• Besides that, it supports 3-phase power configurations.
• Therefore, it suits 63 A servo power applications.

Certification Information

• Built to FANUC industrial standards.
• Protection features meet CNC power needs.
• Tested before shipment by Oiltech Controls.
• Quality checked for industrial automation use.

Packing List

• 1 x FANUC A06B-6087-H115 Power Supply
• 1 x Protective packing
• 1 x Test report
• 1 x Warranty document

Warranty and Shipping

All units come with a 12-month warranty. We ship by FedEx, UPS, and DHL. Each unit is tested before shipment. We support obsolete control systems. We offer tested industrial surplus and refurbished options.

Typical Application Scenarios

• CNC machining centers
• Servo drive power conversion
• Industrial automation control cabinets
• Legacy FANUC system repair
• Obsolete control system replacement

Diagnostic Capability

• Detects overload conditions.
• It also responds to overcurrent events.
• In addition, it protects against overvoltage.
• Furthermore, it supports stable servo power output.
• As a result, it helps reduce unplanned downtime.

Why Buy From Oiltech Controls?

• With 15+ years in industrial automation spare parts, we ship globally via FedEx, UPS, and DHL.
• We also offer tested industrial surplus and refurbished options.
• Every unit comes with a 12-month warranty.
• Moreover, we verify technical specs before shipment.
• Finally, we support obsolete control systems.

Contact Information

Inquiries: info@oiltechcontrols.com
Phone / WhatsApp: +86 158 8020 0923

FAQ

Q: What is the input voltage?
A: 200-230 V AC or DC.

Q: What is the rated current?
A: 63 A.

Q: Is it air cooled?
A: Yes. It uses air cooling.

Q: What is the warranty?
A: 12 months.

Q: How is it shipped?
A: By FedEx, UPS, or DHL.

Q: Does it support obsolete systems?
A: Yes. We support obsolete control systems.

Copyright © 2026 Oiltech Controls Limited. All rights reserved.

Original Source: https://www.oiltechcontrols.com/