GT-H10L Keyence GT Series Digital Contact Sensor Head – Low-Stress, 10 mm Stroke
Active production status. Confirmed by Keyence product page. Last verified: 2026-09.
Product Overview
The Keyence GT-H10L is a general purpose digital contact sensor head. It belongs to the GT Series.
This is a low-stress LVDT type with a 10 mm measuring range. It uses a contact probe to measure displacement.
Low measuring force protects soft or fragile workpieces. It connects to a GT Series amplifier for signal processing and output. The unit weighs about 115 g with a 2 m cable.
Technical Specifications
| Brand | Keyence |
| Model | GT-H10L |
| Series | GT Series |
| Module Type | Digital contact sensor head (LVDT) |
| Type | Low-stress |
| Measuring Range | 10 mm |
| Measuring Force (Downward) | 0.3 N |
| Measuring Force (Side) | 0.25 N |
| Measuring Force (Upward) | 0.2 N |
| Mechanical Response | 7 Hz (at 23 °C) |
| Repeatability | 3 µm (at 23 °C, response 100 ms) |
| Resolution | Depends on GT amplifier settings |
| Linearity | Specified by GT amplifier (typical ±0.1% FS) |
| Temperature Range | -10 to +55 °C (no freezing) |
| Humidity | 35 to 85% RH (no condensation) |
| Protection Rating | Not available |
| Supply Voltage | Via GT Series amplifier |
| Communication | None built-in; signal handled by amplifier |
| Weight | Approx. 115 g (with 2 m cable) |
| Dimensions (H×W×D) | Not available |
| Certifications | CE, RoHS (typical for series; verify per unit) |
Core Performance Highlights
- Measuring range: 10 mm low-stress stroke
- Repeatability: 3 µm at 23 °C, 100 ms response
- Measuring force: 0.2 N to 0.3 N by mounting direction
- Mechanical response: 7 Hz
- Temperature range: -10 to +55 °C
- Humidity: 35 to 85% RH, no condensation
- Noise immunity: Good with shielded amplifier cable and solid ground
- Linearity and resolution: Set by GT amplifier model and filter
Installation Guide
- Mount the GT-H10L with the probe touching the target.
- Keep stroke within 10 mm to avoid damage.
- Match mounting direction to the correct measuring force.
- Connect the cable to a GT Series amplifier.
- Avoid side loads and shock on the probe shaft.
Setup and Maintenance Convenience
The low-stress probe protects delicate parts. This reduces scrap and rework.
All zero, span, and filter settings live in the amplifier. You do not open the head. This keeps calibration stable and service simple.
Compatibility Notes
- Works only with Keyence GT Series amplifiers.
- Uses a dedicated sensor cable, not standard I/O wire.
- Output type depends on the amplifier (analog, BCD, or bus).
- Check amplifier model for resolution and linearity specs.
Certifications, Packaging and Warranty
- Certifications: CE, RoHS (typical; confirm with unit label)
- Packaging: 1 × GT-H10L sensor head with 2 m cable, 1 × quick guide
- Warranty: 12 months from Oiltech Controls
- Shipping: FedEx, UPS, DHL (worldwide)
Typical Applications and Diagnostics
- Thickness measurement on soft or thin parts
- Step height and gap checks in assembly
- Warpage and flatness on glass or film
- Diagnostics: Amplifier shows live value and peak hold. Use it to check contact and stroke.
Why Buy From Oiltech Controls?
- 15+ years in industrial automation spare parts
- Worldwide shipping support
- Tested surplus and refurbished options
- 12-month warranty on every unit
- Technical check before dispatch
- Help with obsolete control systems
FAQ
Q: Is the GT-H10L active?
A: Yes. Keyence confirms active production status.
Q: What amplifier does it need?
A: It works only with GT Series amplifiers.
Q: What is the measuring force?
A: 0.3 N down, 0.25 N side, 0.2 N up.
Q: What is the warranty?
A: 12 months from Oiltech Controls.
Q: How fast is shipping?
A: We ship via FedEx, UPS, or DHL. Lead time varies by stock.
Inquiries:
info@oiltechcontrols.com
|
+86 158 8020 0923
(WhatsApp)
Copyright © 2026 Oiltech Controls Limited. All rights reserved.
Original Source:
https://www.oiltechcontrols.com/
All rights reserved.
Reviews
There are no reviews yet.