Product Overview
The TM0180-A08-B11-C15-D10 is a high reliability industrial vibration transducer. ProvibTech engineers built this armored probe for harsh environments. Armored cabling stops physical tearing and electrical ground loops. Protective rubber boots prevent oil and dust entry at connector joints.
Configuration Breakdown
| Parameter | Specification Code | Details |
|---|---|---|
| Brand | ProvibTech | Original Manufacturer |
| Model Number | TM0180-A08-B11-C15-D10 | Standard Armored 8mm Probe |
| Probe Type | 08 | M10×1 with armor |
| Unthreaded Length | A08 | 80 mm |
| Case Length | B11 | 110 mm |
| Total Length | C15 | 1.5 m |
| Connector Type | D10 | Yes |
Technical Data
| Technical Metric | Measurement Parameter |
|---|---|
| Brand & Model | ProvibTech TM0180-A08-B11-C15-D10 |
| Power Supply Voltage | -23 to -30 VDC |
| Power Supply Current | Less than 12 mA |
| Linear Range | 0.25 to 2.25 mm (10 to 90 mils) |
| Sensitivity | 7.87 mV/um (200 mV/mil) |
| Linearity Deviation | Within plus or minus 0.0254 mm |
| Frequency Response | 0 to 10.0 KHz (plus or minus 3 dB) |
| Minimum Target Size | 15 mm (0.6 inch) diameter |
| Driver Temperature | -40 degrees Celsius to +80 degrees Celsius |
| Probe Temperature | -40 degrees Celsius to +177 degrees Celsius |
Certifications and Standards
- ATEX hazardous area approvals (II 1 G, EEx ia IIC T4)
- CSA intrinsically safe ratings (Class I, Div 1, Groups A, B, C, D)
- PCEC compliance for explosive atmospheres
- GOST R certified vibration monitoring hardware
Target Applications and Equipment Compatibility
- Heavy industrial steam turbines
- Multi-stage centrifugal compressors
- Large high-speed boiler feed water pumps
- Heavy-duty industrial gearboxes
- Critical power generation fans
Installation, Diagnostics, and Maintenance
- Verify bracket clearance before threading the M10x1 probe body.
- Secure the armored cable away from sharp mechanical pinch points.
- Test static gap voltage using a digital multimeter during startup.
- Inspect rubber boots routinely for chemical degradation or oil pooling.
- Monitor output signals for high-frequency noise indicating ground faults.
Package Contents and Shipping Policy
- One TM0180-A08-B11-C15-D10 sensor assembly
- Integrated protective rubber boot
- Factory calibration data sheet
- Full 12-month service warranty
- Fast dispatch within 12 to 48 hours
- Express courier delivery via FedEx, UPS, and DHL
Frequently Asked Questions
- Question: How does armor protection help in harsh industrial sites?
Answer: Steel armor shields the internal conductor against severe mechanical tearing, chemical spills, and accidental crushing on heavy machinery. - Question: What gap voltage should technicians target during cold alignment?
Answer: Technicians should aim for a mid-range gap voltage of approximately -10 to -12 VDC, which corresponds to the linear center of the 0.25 to 2.25 mm range. - Question: Can this specific model handle hazardous gas zone installations?
Answer: Yes, certified ATEX and CSA intrinsic safety ratings allow safe deployment inside Class I Division 1 hazardous areas. - Question: Why is target material selection critical for accurate readings?
Answer: Eddy current probes rely on target conductivity and permeability. Calibration against standard AISI4140 steel ensures precise displacement output. - Question: How can I request immediate project pricing and stock availability?
Answer: Send your inquiry directly to our sales desk via email at info@oiltechcontrols.com or message us instantly on WhatsApp at +86 158 8020 0923.
Oiltech Controls Limited Insight
Reliable vibration monitoring forms the backbone of modern predictive maintenance programs. Plant engineers select the TM0180-A08-B11-C15-D10 because its armored housing and stable electrical linearity prevent false machine trips. Fast global logistics from Oiltech Controls Limited ensure your facility minimizes costly downtime.
Contact Information Inquiries: Email info@oiltechcontrols.com | WhatsApp +86 158 8020 0923
Copyright © 2026 Oiltech Controls Limited. All rights reserved.
Original Source: https://www.oiltechcontrols.com/
Reviews
There are no reviews yet.