STBDDI3610 Digital Input Module for Advantys STB Systems
The STBDDI3610 is a 6-channel digital input module from the Schneider Electric Advantys STB series. It reads 24 V DC field signals with 2-wire sink wiring. The input logic works as positive or negative. Response time is fixed at 1 ms. Hot swapping lets you replace the module while the system runs. This module is discontinued and superseded by the Modicon X80 range. Oiltech Controls supplies tested units for legacy STB systems.
Brand: Schneider Electric
Model: STBDDI3610
Series: Advantys STB
Type: Standard Digital Input Module
Channels: 6, sink, 2-wire
Status: Discontinued, superseded by Modicon X80, last verified 2026-09
Why Buy From Oiltech Controls?
- 15+ years in industrial automation spare parts
- Global shipment support through FedEx, UPS and DHL
- Tested surplus and refurbished options available
- 12-month warranty on every eligible unit
- Technical verification before shipment on all orders
- Support for obsolete control systems and hard-to-find modules
Technical Specifications
| Brand | Schneider Electric |
| Model | STBDDI3610 |
| Series | Advantys STB |
| Module Type | Standard digital input module |
| Channels | 6, sink, 2-wire |
| Signal Type | 24 V DC, IEC/EN 61131-2 Type 1 |
| Response Time | Fixed 1 ms |
| Input Logic | Positive or negative, configurable |
| Isolation | 1500 V DC field-to-bus for 1 minute |
| Hot Swapping | Yes |
| Field Wiring | 0.5 to 1.5 mm² wire |
| Supply Voltage | 24 V DC via PDM |
| Bus Current | 60 mA at 5 V DC |
| I/O Base | STBXBA1000, 13.9 mm |
| PDM | STBPDT3100, 24 V DC |
| Protection Rating | IP20 |
| Weight | 0.112 kg |
| Operating Temperature | Not available |
| Storage Temperature | Not available |
Installation Guide
- Switch off field power before you start work.
- Mount the module on an STBXBA1000 I/O base.
- Use the STBPDT3100 PDM for 24 V DC supply.
- Wire field devices with 0.5 to 1.5 mm² cable.
- Set input logic to positive or negative as needed.
- Check 2-wire sink wiring before you power up.
- Keep signal cables away from high-noise power lines.
- Hot swap only when the system design allows it.
Commissioning and Maintenance
- The fixed 1 ms response supports fast input scanning.
- No onboard diagnostics are listed for this module.
- Use PLC status and field LEDs to find faults.
- Check wiring and PDM supply during routine service.
- Hot swapping cuts downtime on live STB systems.
Compatibility Notes
- Designed for the Schneider Electric Advantys STB system.
- Requires STBXBA1000 I/O base for mounting.
- Requires STBPDT3100 PDM for 24 V DC power.
- Discontinued and superseded by the Modicon X80 range.
- Check your rack and PDM before you order.
Certifications
- Input standard: IEC/EN 61131-2 Type 1.
- Isolation: 1500 V DC field-to-bus for 1 minute.
- Protection rating: IP20 for clean panel use.
- Full certificate list: ask our team before you order.
Packing List
- 1 x STBDDI3610 digital input module
- 1 x protective packing box
- 1 x order and test record
- 1 x warranty document
Warranty and Shipping
- 12-month warranty on eligible modules.
- FedEx, UPS and DHL shipping options available.
- Tracking number sent after dispatch.
- Technical check before shipment on every order.
- Contact: info@oiltechcontrols.com
- WhatsApp: +86 158 8020 0923
Typical Applications
- Legacy Advantys STB control panels
- 24 V DC switch and sensor inputs
- Discrete signal acquisition in factory automation
- Obsolete system repair and spare parts stock
- Water, power and process control cabinets
Diagnostic Capability
The STBDDI3610 has no listed onboard diagnostics. Engineers must use PLC program logic and field devices to find faults. The fixed 1 ms response supports normal discrete scanning. The 1500 V DC isolation helps protect the bus from field noise. For faster fault finding, pair it with an STB network interface that reports module status.
FAQ
Q: Is the STBDDI3610 still in production?
A: No. It is discontinued and superseded by Modicon X80. Oiltech Controls supplies tested units.
Q: How many channels does it have?
A: 6 channels, sink, 2-wire.
Q: What input voltage does it use?
A: 24 V DC, IEC/EN 61131-2 Type 1.
Q: What is the response time?
A: Fixed at 1 ms.
Q: Can I use positive and negative logic?
A: Yes. Input logic is configurable.
Q: Does it support hot swapping?
A: Yes.
Q: What base and PDM do I need?
A: Use the STBXBA1000 base and STBPDT3100 PDM.
Q: What warranty do you provide?
A: 12-month warranty on eligible units.
Q: How do you ship?
A: We ship by FedEx, UPS and DHL.
Q: How do I contact your team?
A: Email info@oiltechcontrols.com or WhatsApp +86 158 8020 0923.
Copyright © 2026 Oiltech Controls Limited. All rights reserved.
Original Source: https://www.oiltechcontrols.com/
Reviews
There are no reviews yet.