A02B-0030-C004 FANUC Series 5 CNC MDI Keypad Panel

A02B-0030-C004 FANUC Series 5 CNC MDI Keypad Panel

The A02B-0030-C004 is an MDI front operator interface keypad panel for FANUC Series 5 CNC controls. It is a passive front-panel assembly. It carries no built-in communication ports. Aftermarket listings also reference Mazak applications. This part suits repair and legacy machine restoration.

Hardware Identity

• Model: A02B-0030-C004
• Brand: FANUC
• Series: FANUC Series 5 CNC
• Function: MDI keypad and operator front panel
• Type: passive component, no communication ports
• Display form: MDI panel with 7-segment display

Electrical and Signal Notes

• Supply voltage: not published by FANUC for this order code.
• Early CRT/MDI unit design; no official spec located.
• Treat as a front-panel keypad assembly, not a control board.
• Confirm connector pinout against the machine before install.

Climatic Limits

• Operating ambient: 0 to 55 °C (family-level reference).
• Storage and transport: −20 to 60 °C (family-level reference).
• Relative humidity: 75%RH or less, no condensation.
• Family data from B-61393E p.112, Series 0/00/0-Mate.
• Confirm limits for this order code before deployment.

Physical Data

• Weight: about 1.47 kg (supplier-reported).
• Dimensions: not published as a numerical table.
• Panel format suits early FANUC CRT/MDI front assemblies.

Lifecycle Status

• Legacy early FANUC CNC generation.
• Superseded by i-series and 30i-B generation controls.
• No official end-of-service date verified.
• Status last verified 2026-09.

Compatible Equipment

• FANUC Series 5 CNC controls (verify against official docs).
• Legacy machining centers with early CRT/MDI panels.
• Mazak machines referenced in aftermarket listings.
• Retrofit and repair projects for obsolete CNC fronts.

Lead Time and Warranty

• 12-month warranty on eligible units.
• Dispatch within 24 to 28 hours after confirmation.
• Shipping by FedEx, UPS and DHL.
• Technical verification before shipment.

Oiltech Controls’s Insight

• Early FANUC keypads fail at membrane and key contacts.
• Check connector style and key layout before ordering.
• Photograph the old panel label and harness.
• Confirm the machine builder wiring before swap.
• Keep the original panel for reference.

Why Buy From Oiltech Controls?

• More than 15 years in automation spare parts sourcing.
• Worldwide shipping support.
• Tested surplus and refurbished options.
• 12-month warranty on eligible products.
• Technical checks before every shipment.
• Help with obsolete control systems.

FAQ

Q: Is the A02B-0030-C004 a control board?
A: No. It is an MDI keypad and front operator panel assembly.

Q: Does it have communication ports?
A: No. It is a passive component with no built-in ports.

Q: How do I confirm fitment?
A: Match the panel label, key layout, connector type and harness. Verify with FANUC documentation.

Q: What should I check on a used panel?
A: Inspect key response, cable condition, display segments and mounting holes. Ask for test notes.

Q: Can I use it on later FANUC controls?
A: It is listed for Series 5. Later i-series and 30i-B panels differ. Do not assume interchangeability.

Inquiries: info@oiltechcontrols.com or +86 158 8020 0923.

Copyright © 2026 Oiltech Controls Limited. https://www.oiltechcontrols.com/ All rights reserved.

All rights reserved.