A02B-0222-C165 FANUC 10.5-Inch LCD Operator Panel
Product Title: A02B-0222-C165 FANUC A02B Series Operator Panel, 10.5-Inch LCD, IP54
The FANUC A02B-0222-C165 is an operator panel from the A02B series. It carries a 10.5-inch LCD for machine control and status viewing. The panel works on a 480VDC, three-phase supply. Its IP54 rating blocks dust and splash. The unit runs from 0 to 60°C at up to 80% RH without condensation. Oiltech Controls ships it in 24 to 28 hours with a 12-month warranty.
Technical Data
- Brand: FANUC
- Model: A02B-0222-C165
- Product line: A02B
- Type: operator panel
- Display: 10.5-inch LCD
- Protection class: IP54
- Output voltage: 480VDC
- Phases: 3
- Temperature range: 0 to 60°C
- Operating humidity: 80% RH max, no condensation
- Storage humidity: 80% RH max, no condensation
- Operating altitude: 1000 m max, no derating
- Storage altitude: 1000 m max
Panel Notes for Engineers
- Read the 480VDC three-phase supply rating before you wire the panel. Confirm your CNC cabinet matches this input.
- IP54 protection suits dusty shop floors and coolant splash zones.
- Keep cabinet temperature below 60°C. Add forced air if the enclosure runs hot.
- Use sealed glands and dry air lines to hold humidity under 80% RH.
- Mount at or below 1000 m altitude for full performance.
Fit and Use
- FANUC CNC machine control stations
- Machining centers and turning cells
- Operator terminals in retrofit and repair jobs
- Industrial cabinets with limited mounting depth
- Lines that need display feedback plus operator input
This panel suits maintenance teams repairing an existing FANUC cell. Match the A02B series and part number before you order. Check the display cable and connector type on the old unit. Call +86 158 8020 0923 or email info@oiltechcontrols.com for a cross-check.
Oiltech Controls’s Insight
The A02B-0222-C165 is a display and control interface, not a drive. The 480VDC figure reflects the cabinet supply class, so confirm it against the machine data sheet. Experienced FANUC users ask for the full A02B string. Small suffix changes in the A02B family mean different connectors or firmware. Supply the machine serial number with your order. That step saves a return and a lost shift.
Why Buy From Oiltech Controls?
- More than 15 years sourcing automation spares worldwide
- Fast dispatch and global shipment via FedEx, UPS, and DHL
- Tested surplus and refurbished units in stock
- 12-month warranty on every order
- Technical check and photo confirmation before shipment
- Lifeline support for discontinued control systems
FAQ
Is the 480VDC rating the panel input or output?
The datasheet lists it as output voltage across three phases. Treat it as the cabinet supply class. Confirm against your FANUC machine documentation before you wire it.
Can I swap a different A02B suffix panel into this machine?
Not safely without a check. Suffixes differ in connectors, firmware, and key layout. Send us your machine serial number and the old part photo. We verify the match first.
What does IP54 cover in practice?
It blocks dust ingress and water spray from any direction. It does not allow immersion. Keep the panel face dry and clean the bezel with a damp cloth only.
How should I store a spare A02B panel?
Keep it in a dry area under 80% RH. Avoid condensation cycles. Store between 0 and 60°C. Keep the original foam packing to protect the LCD.
What should I inspect when buying a used FANUC operator panel?
Check the LCD for dead pixels and backlight fade. Test every key and the communication link. Ask for a test report. Oiltech Controls runs these checks before dispatch.
Contact
Email: info@oiltechcontrols.com
WhatsApp: +86 158 8020 0923
Copyright © 2026 Oiltech Controls Limited. https://www.oiltechcontrols.com/ All rights reserved.
All rights reserved.
Reviews
There are no reviews yet.