IC200ALG326 Analog Output Module – GE Fanuc Versamax
IC200ALG326 is a 13‑bit analog output module from the GE Fanuc Versamax series. It delivers 8 single‑ended current‑sourcing outputs. Default range is 4–20 mA; jumper‑selectable 0–20 mA. The module supports hot insertion, but improper handling may disrupt backplane power. Programming is executed by the main CPU. Use a jumper to hold outputs in default state if power is lost.
Product Description
This output module is built for reliable field actuation in industrial control systems. It offers 8 isolated channels with 250 VAC continuous isolation. Diagnostic tools and two LED indicators simplify daily monitoring. The outputs are arranged in one common group, with no channel‑to‑channel isolation required. The module uses shielded cables for optimal noise immunity. Installation can be direct cable shield or via an interposing terminal. The 15‑ms update rate ensures responsive control in fast‑loop applications.
Technical Specifications
| Brand | GE Fanuc |
| Series | Versamax |
| Part Number | IC200ALG326 |
| Type | Analog Output Module |
| Channels | 8 single‑ended |
| Resolution | 15 Bits (13‑bit effective) |
| Current Ranges | 4–20 mA (default) / 0–20 mA (jumper) |
| Update Rate | 15 ms maximum |
| Isolation | 250 VAC continuous, 1500 VAC for 1 min |
| Backplane Current | 5 VDC, 50 mA max |
| Voltage Range | 18–30 VDC |
| Current Draw (all 8 outputs) | 185 mA at full scale |
| Inrush Current | 2 A max |
| LED Indicators | Two (status / diagnostics) |
| Diagnostics | Built‑in, user‑configurable |
| Temperature (operating) | 0 to 60 °C |
| Environmental / Immunity | Designed for noisy industrial environments |
| Default Output State | Configurable via jumper |
Installation & Wiring
- Use shielded cables for all field connections.
- Connect shield directly or via interposing terminal.
- Hot insertion supported – follow proper procedure to avoid backplane disruption.
- Mount in a clean, dry cabinet with adequate airflow.
- Terminals accept 0.2–2.5 mm² wire.
Commissioning & Maintenance
LED indicators provide instant status. Diagnostics are built‑in and configurable. The CPU handles all programming. Use the jumper to set the safe output state during power‑loss events. Routine inspection of wiring and connectors is recommended.
Compatibility
Fully compatible with GE Fanuc Versamax backplanes and CPUs. Works seamlessly with Modicon Quantum systems via appropriate adapters (refer to system manual).
Certifications & Compliance
- UL listed
- CE marked
- RoHS compliant
- Designed per IEC 61131‑2
Package Contents
- IC200ALG326 module (1 unit)
- User manual (digital download)
- Installation guide
Warranty & Shipping
12‑month warranty against defects. Global shipping via FedEx, UPS, or DHL. Orders are processed within 24 hours.
Typical Applications
- Valve position control
- Variable speed drives
- Analog signal conditioning
- Process automation loops
- Test & measurement rigs
Diagnostic Capabilities
Built‑in diagnostics monitor channel status, open‑circuit detection, and over‑range conditions. LED indicators signal fault states for rapid troubleshooting.
FAQ
- Can I use 0–20 mA outputs? Yes, configure via internal jumper.
- Is isolation required between channels? No, all channels are grouped without isolation.
- What is the update rate? 15 ms max, suitable for most control loops.
- Can I hot‑swap the module? Yes, but follow the recommended procedure to avoid bus disruption.
Why Buy From Oiltech Controls?
- Over 15 years in industrial automation spare parts.
- Global logistics – we ship worldwide.
- All products tested – surplus and refurbished options available.
- 12‑month warranty on every module.
- Technical verification performed prior to shipment.
- Expert support for obsolete control systems.
Contact us:
info@oiltechcontrols.com |
+86 158 8020 0923 (WhatsApp)
Copyright © 2026 Oiltech Controls Limited. All rights reserved.
Original Source: https://www.oiltechcontrols.com/
Reviews
There are no reviews yet.