Product Overview
The IC697ALG320 is a 4-channel analog output module for the GE Fanuc Series 90-70 PLC. It provides both voltage (-10V to +10V) and current (0-20mA / 4-20mA) outputs. This module has a 16-bit resolution with 14-bit monotonicity. It delivers a fast 2 ms update rate. The IC697ALG320 is factory calibrated. It stores calibration data in EEPROM. This module suits demanding industrial control applications.
Technical Specifications
| Brand | GE Fanuc (formerly); Emerson Automation (current) |
| Model | IC697ALG320 |
| Series | Series 90-70 |
| Product Type | Analog Output Module |
| Channels | 4 (individually configurable) |
| Voltage Output | -10V to +10V (default) |
| Current Output | 0-20 mA / 4-20 mA (default 4-20mA) |
| Resolution | 16-bit with 14-bit monotonicity |
| LSB Step | 312.5 µV (voltage) / 0.5 µA (current) |
| Conversion Rate | 2.0 ms (all channels) |
| Accuracy (Voltage) | ±2.5 mV at full scale (10V) |
| Accuracy (Current) | ±5 µA at 4mA & 20mA (factory set) |
| Power Draw | 1.66A @5V (8.3W) + 150mA user supply |
| External Supply | 10-30 VDC (24V typical) |
| Temperature Coefficient | 25 ppm/°C (voltage), 50 ppm/°C (current) |
| Module Width | 1 slot (5 or 10-slot baseplate) |
| Weight | 0.84 kg |
| Lifecycle | Discontinued / Obsolete (support available) |
Key Features
- 4 individually configurable channels for voltage or current.
- 16-bit resolution with 14-bit monotonicity for precise control.
- Fast 2 ms conversion rate suitable for dynamic processes.
- Factory calibrated with EEPROM storage (no re-calibration needed).
- Short-circuit protection auto recovery after fault removal.
- Diagnostic facilities over/under range, open-wire, config error.
- Isolated output circuitry for noise immunity.
- User scaling via configuration software.
Installation & Wiring
- Occupies a single slot in Series 90-70 rack (5 or 10-slot).
- Connect up to 7 modules per CPU rack; 8 per expansion rack.
- Use shielded twisted-pair cables for analog signals.
- Provide external 24V DC supply for current outputs.
- Observe polarity for voltage/current connections.
- Ensure proper grounding to avoid ground loops.
Diagnostics & Maintenance
- On-board diagnostics: over range, under range, open-wire.
- Configuration error detection via software.
- Module health status available to CPU.
- EEPROM retains calibration no periodic adjustment.
- LED indicators for power and channel status (if equipped).
Compatibility & Integration
- Designed for GE Fanuc Series 90-70 PLC systems.
- Compatible with Emerson Automation legacy support.
- Works with CPU models 731, 732, 771, 781, etc.
- Configuration software (Logicmaster, CIMPLICITY) required.
- Supports up to 252 output channels with multiple modules.
- Also works with Modicon Quantum via appropriate adapters (not direct).
Typical Applications
- PID loop control valve positioners, actuators.
- Speed control for variable frequency drives.
- Process control temperature, pressure, flow.
- Motor control centers with analog setpoints.
- Power generation turbine governor control.
Certifications & Standards
- UL listed for industrial control equipment.
- CE marked (EMC and safety).
- RoHS compliant.
- Designed per GE Fanuc quality standards.
- Suitable for Class I, Division 2 hazardous locations (with proper installation).
Package Contents
- 1x IC697ALG320 Analog Output Module
- Installation guide (quick start)
- Product manual (PDF download available)
- Warranty card
Warranty & Shipping
- 12-month warranty against defects.
- Global shipping via FedEx, UPS, DHL.
- Fast handling typically ships in 1-2 business days.
- Insured and trackable shipment.
Frequently Asked Questions (FAQ)
- Q: Is this module still manufactured?
A: Discontinued, but we offer tested surplus/refurbished units. - Q: Can I mix voltage and current outputs?
A: Yes, each of the 4 channels is individually configurable. - Q: What is the maximum load for current output?
A: Up to 700Ω resistive; 1µF capacitive; 250mH inductive. - Q: Does it support HART protocol?
A: No, this is a standard analog output module. - Q: How to configure the output ranges?
A: Use GE Logicmaster or CIMPLICITY software. - Q: What is the update rate?
A: 2 ms for all four channels sequentially.
Why Buy from Oiltech Controls?
- 15+ years in industrial automation spare parts.
- Global shipment support with trusted carriers.
- Tested surplus / refurbished options.
- 12-month warranty for reliability.
- Technical verification before shipment.
- Support for obsolete systems including Modicon Quantum.
Contact Information
Inquiries: info@oiltechcontrols.com
Phone / WhatsApp: +86 158 8020 0923
Copyright © 2026 Oiltech Controls Limited. All rights reserved.
Original Source: https://www.oiltechcontrols.com/










Reviews
There are no reviews yet.