Keyence IV-H500MA: Standard Distance Monochrome Vision Sensor
The IV-H500MA is an integrated vision sensor camera from the Keyence IV Series. It uses a 1/3 inch monochrome CMOS sensor with 752 x 480 pixels. This model is built for standard distance work between 50 mm and 500 mm. It runs on 24 VDC and draws 0.6 A or less. The red LED illumination supports pulse and DC modes. Auto focus cuts setup time on the line.
Hardware Details
- Type: Integrated sensor, standard distance, monochrome.
- View at 50 mm: 25 x 18 mm. View at 500 mm: 210 x 157 mm.
- Exposure time: 1/10 to 1/25,000.
- Detection tools: 16. Position adjustment tool: 1.
- Switch settings: 32 programs.
- Tool set includes shape detection, edge pixels, width, diameter, pitch.
Communication and I/O
- Port: M12 4-pin, 100BASE-TX / 10BASE-T.
- Protocols: FTP client, EtherNet/IP, PROFINET.
- Inputs: 6 (IN1 to IN6). Outputs: 4 (OUT1 to OUT4).
- Output type: Open collector, NPN/PNP switchable, N.O./N.C. switchable.
- Max output rating: 26.4 V, 50 mA.
Environmental and Physical
- Operating temperature: 0 to +50°C, no freezing.
- Humidity: 35 to 85% RH, no condensation.
- Protection: IP67, except with polarizing filter OP-87436/OP-87437.
- Vibration: 10-55 Hz, 1.5 mm, 2 hours X/Y/Z.
- Shock: 500 m/s², 3 times, 6 directions.
- Case: Aluminum die-casting. Front cover: Acrylic.
- Weight: Approx. 270 g.
Where It Fits
- Small part presence and absence checks.
- Edge and width measurement on compact assemblies.
- Position adjustment for pick-and-place heads.
- Pitch and diameter checks on connectors.
- Monochrome contrast tasks with red LED light.
Oiltech Controls’s Insight
- The IV-H500MA shines in short to mid range jobs.
- Monochrome sensor gives sharp edge data.
- 32 programs let you switch parts without reboot.
- Auto focus saves time during changeover.
- Good fit for older lines that still use 10BASE-T.
Oiltech Controls Review
- Solid pick for standard distance monochrome tasks.
- Fewer tools than color models, but fast and stable.
- IP67 rating handles washdown areas.
- Open collector output works with most PLCs.
- Refurbished units cut cost without losing function.
Why Buy From Oiltech Controls?
- 15+ years in industrial automation spare parts.
- Global shipping with FedEx, UPS, and DHL.
- Tested surplus and refurbished options in stock.
- 12-month warranty on every order.
- Technical check before dispatch.
- Support for obsolete control systems.
Shipping and Warranty
- Orders ship in 24 to 28 hours.
- Carriers: FedEx, UPS, DHL.
- 12-month warranty from delivery date.
- Covers manufacturing defects only.
- Tracking number sent after dispatch.
FAQ
Q: Can the IV-H500MA read small parts at 50 mm?
A: Yes. The view is 25 x 18 mm at that distance. It works for tiny features.
Q: Does it need a separate light source?
A: No. It has a built-in red LED. You can switch between pulse and DC modes.
Q: How many part programs can I store?
A: Up to 32 programs. This helps when you change products often.
Q: Is the IV-H500MA hard to replace on an old line?
A: Not at all. It uses standard 24 VDC and M12 wiring. We also support obsolete systems.
Q: What should I check before buying a used unit?
A: Confirm the lens is clear and the M12 pins are clean. Ask for a test report. We verify each unit before shipping.
For inquiries: info@oiltechcontrols.com or +86 158 8020 0923 (WhatsApp).
Copyright © 2026 Oiltech Controls Limited. https://www.oiltechcontrols.com/ All rights reserved.
Reviews
There are no reviews yet.