MC07B0110-5A3-4-00 SEW MOVITRAC B Inverter 11 kW 15 HP

MC07B0110-5A3-4-00 SEW MOVITRAC B Inverter 11 kW

The MC07B0110-5A3-4-00 is a SEW MOVITRAC B inverter for 400 V 3-phase supply. It drives 11 kW / 15 HP motors with 24 A nominal output current. Size 2 housing measures 130 × 335 × 229 mm and weighs 6.6 kg. The unit runs 4Q with a brake chopper and C2 suppression. It fits standard cabinet builds and retrofit panels. Wiring follows the proven MOVITRAC B terminal layout. This drive targets engineers who need stable torque and short commissioning time.

Technical Specifications

• Model: MC07B0110-5A3-4-00
• Series: MOVITRAC B
• Supply: 380-500 VAC, 3 phase, 50/60 Hz
• Motor power: 11 kW / 15 HP
• Nominal output current: AC 24 A
• Operation: 4Q with brake chopper
• Suppression: C2
• Size: 2
• Dimensions: 130 × 335 × 229 mm
• Weight: 6.6 kg
• Configuration: Standard

Suitable Equipment

• Conveyor lines with frequent starts and stops
• Centrifugal pumps and fans
• Mixers and agitators
• Packaging and filling machines
• Hoists and lifting gear with brake resistor
• Legacy panels replacing failed MOVITRAC B units

Oiltech Controls’s Insight

• Size 2 frame leaves room for brake resistor wiring.
• 24 A output suits 11 kW motors with moderate overload.
• C2 filter cuts cabinet noise in industrial sites.
• 4Q braking recovers energy during fast stops.
• Standard build keeps spare-part matching simple.

Delivery and Warranty

• Warranty: 12 months
• Dispatch: 24-28 hours after order
• Couriers: FedEx, UPS, DHL
• Tracking number sent on shipment

Why Buy From Oiltech Controls?

• 15+ years of industrial automation spare parts work
• Shipments to customers worldwide
• Tested industrial surplus and refurbished units
• 12-month warranty on every drive
• Technical check before each shipment
• Help with obsolete control systems

Reach us at info@oiltechcontrols.com or +86 158 8020 0923 on WhatsApp.

FAQ

Q: Can this drive replace an older MOVITRAC B unit in the same panel?

A: Yes. Size 2 dimensions and terminal layout match the series. Check motor cable length and C2 filter wiring before swap.

Q: What brake resistor should I pair with 4Q operation?

A: Match resistor ohms and wattage to 24 A output and stop cycle. Oversize wattage for frequent braking.

Q: Is 11 kW enough for my pump or fan load?

A: Check motor nameplate current against 24 A. Variable torque loads often run below rated current.

Q: How do I confirm the drive suits 400 V 3-phase supply?

A: The input range covers 380-500 VAC at 50/60 Hz. Measure site voltage before install.

Q: What should I check on a refurbished unit before buying?

A: Ask for test records, fan condition, and DC bus readings. Confirm warranty terms and dispatch time.

Copyright © 2026 Oiltech Controls Limited. https://www.oiltechcontrols.com/ All rights reserved.

All rights reserved.