MPX22A-DFC20A-MPI-0095-5E3-CA-C by SEW-EURODRIVE | MOVIPRO Decentralized Inverter
MPX22A-DFC20A-MPI-0095-5E3-CA-C is a decentralized field-mounted inverter from the SEW-EURODRIVE MOVIPRO technology series. It delivers 9.5 A output current and 4.0 kW rated power in a compact Size 2 housing. The DFC20A PROFINET IO interface enables direct fieldbus communication. The CA variant uses a standard motor connection and omits the MOVILINK DDI motor interface. The unit suits conveyor systems, intralogistics and modular plant builds where the drive mounts close to the motor and removes the need for a central cabinet.
Why This Model Stands Out
- Field-mounted design cuts cabinet space and cable runs.
- IP65 protection allows installation near the process.
- PROFINET IO on M12 D-coded ports speeds up wiring and commissioning.
- Four control modes cover simple and demanding motion tasks.
- Fanless operation up to 24 A reduces maintenance points.
- Integrated C2 EMC filter supports 3 x AC 380-500 V supply.
Technical Specifications
| Parameter | Value |
|---|---|
| Brand | SEW-EURODRIVE |
| Model | MPX22A-DFC20A-MPI-0095-5E3-CA-C |
| Series | MOVIPRO technology, Decentralized Inverter |
| Module Type | Field-mounted inverter, DFC20A PROFINET IO, Size 2, CA variant |
| Rated Output Current | 9.5 A |
| Rated Power (Asynchronous Motor) | 4.0 kW |
| Apparent Output Power | 6.6 kVA |
| Supply Voltage | 3 x AC 380-500 V, 50-60 Hz +/-10% |
| Nominal Line Current | 8.55 A at 400 V, 7.13 A at 480 V |
| Nominal DC Link Voltage | DC 560 V |
| Overload Capacity | 200% of I_N for 3 s at 4 kHz PWM |
| PWM Frequency | 4 / 8 / 16 kHz, adjustable |
| Max Output Frequency | U/f 599 Hz, VFCplus 250 Hz, CFC 500 Hz, ELSM 500 Hz |
| Control Modes | U/f, VFCplus, CFC, ELSM |
| Motor Support | SEW synchronous and asynchronous motors, third-party motors |
| Encoder Evaluation | sin/cos, TTL/HTL, RS422, HIPERFACE |
| I/O | Up to 12 digital inputs, 8 digital outputs, 1 relay, 2 analog inputs, 2 analog outputs |
| Brake Control | DC 24 V BMV5, AC 230-460 V BD1B, safe brake SBM |
| Communication | PROFINET IO, M12 4-pin D-coded connectors |
| Safety Options | PROFIsafe, CIP Safety, Safety over EtherCAT, CSB31A, CSS.1A, CSA31A |
| Temperature Range | -25 to +40 °C no derating, +40 to +60 °C with derating |
| Storage Temperature | -25 to +70 °C, non-condensing |
| Environmental Class | IEC 60721-3-3 class 3K22 |
| Protection Rating | IP65 to EN 60529 |
| Dimensions (H x W x D) | 300 x 480 x 162 mm without interface box, 364 x 620 x 180 mm with box |
| Weight | Approx. 15.5 kg |
| Rectifier | Not controlled |
Installation Guide
- Mount the unit close to the motor on a rigid frame.
- Keep the IP65 seal intact on all covers and connectors.
- Use the M12 D-coded PROFINET ports for fieldbus cabling.
- Wire the supply as 3 x AC 380-500 V with the integrated C2 filter.
- Connect the brake through BMV5, BD1B or SBM as required.
- Respect the -25 to +40 °C range for full load.
- Apply derating between +40 and +60 °C.
Commissioning and Maintenance
- Set motor data and control mode with SEW startup tools.
- Select U/f, VFCplus, CFC or ELSM to match the load.
- Adjust PWM to 4, 8 or 16 kHz for noise and losses.
- The fanless design removes fan service and filter checks.
- Diagnostics run through PROFINET IO and the drive status LEDs.
- Check seals and connectors at each planned service interval.
Compatibility Notes
- Works with SEW synchronous and asynchronous motors.
- Supports third-party motors with correct parameter setup.
- Fits the MOVI-C automation system.
- Encoder options cover sin/cos, TTL/HTL, RS422 and HIPERFACE.
- Other DFC variants exist: DFC1 EtherCAT/SBusPLUS and DFC3 EtherNet/IP plus Modbus TCP.
- The CA variant uses a standard motor connection, not MOVILINK DDI.
Approvals and Compliance
- Protection rating tested to EN 60529.
- Climate class follows IEC 60721-3-3 3K22.
- Storage class follows IEC 60721-3-1 1K21.
- Integrated C2 EMC filter for the 380-500 V range.
- Current SEW-EURODRIVE product line, part of MOVI-C.
Packing List and Warranty
- 1 x MPX22A-DFC20A-MPI-0095-5E3-CA-C inverter.
- Interface box as ordered.
- Protective caps for M12 ports.
- 12-month warranty from Oiltech Controls.
- Shipping by FedEx, UPS or DHL.
Typical Applications
- Conveyor lines and sorters in intralogistics.
- Modular machines with drives spread along the line.
- Automotive and general assembly cells.
- Packaging lines that need short motor cables.
- Retrofit projects replacing central cabinet drives.
Diagnostic Capabilities
- PROFINET IO carries status and fault data to the PLC.
- The drive reports overload and thermal events.
- Encoder feedback faults appear in the control word.
- Local LEDs show power and communication state.
- Safety options add PROFIsafe or CIP Safety diagnostics.
Why Buy From Oiltech Controls?
- 15+ years sourcing industrial automation spare parts.
- Global shipment to customers worldwide.
- Tested surplus and refurbished options available.
- 12-month warranty on every order.
- Technical verification before dispatch.
- Obsolete control systems supported with expert help.
FAQ
- Q: Does this drive include a MOVILINK DDI motor plug? No. The CA variant uses a standard motor connection.
- Q: Which fieldbus does it use? PROFINET IO via DFC20A and M12 D-coded ports.
- Q: Can it run third-party motors? Yes, with correct parameter setup.
- Q: What is the overload rating? 200% of I_N for 3 s at 4 kHz PWM.
- Q: Is a fan needed? No. The unit is fanless.
- Q: How long is the warranty? 12 months from Oiltech Controls.
Contact Oiltech Controls
Email: info@oiltechcontrols.com
WhatsApp: +86 158 8020 0923
Send your model list to info@oiltechcontrols.com or message us on WhatsApp for a fast quote.
Copyright © 2026 Oiltech Controls Limited. All rights reserved.
Original Source: https://www.oiltechcontrols.com/
All rights reserved.
Reviews
There are no reviews yet.