Schneider STBDAI5230 2-Channel 115V AC Input Module | Advantys STB

STBDAI5230 | Schneider Electric Advantys STB Digital Input Module

STBDAI5230 is a standard 2-channel 115V AC digital input module from the Schneider Electric Advantys STB series. It reads IEC/EN 61131-2 Type 1 signals. It supports hot swapping. Field-to-bus isolation reaches 1780V AC for 1 minute. This module suits distributed control systems that need reliable AC input sensing.

Note: This module is discontinued. Schneider Electric superseded it with the Modicon X80 range. Last verified: 2026-09.

Why Buy From Oiltech Controls?

• 15+ years in industrial automation spare parts
• Global shipment support through FedEx, UPS, and DHL
• Tested industrial surplus and refurbished options
• 12-month warranty on every eligible order
• Technical verification before shipment
• Support for obsolete control systems

Questions? Email info@oiltechcontrols.com or message us on WhatsApp at +86 158 8020 0923.

Technical Specifications

Key Performance Notes

• Measurement range: 115V AC input
• Frequency response: Follows IEC/EN 61131-2 Type 1
• Sensitivity: Type 1 threshold behavior
• Linearity: Not specified by manufacturer
• Resolution: 2 discrete channels
• Temperature range: Not available
• Environmental tolerance: IP20 rated
• Noise immunity: 1780V AC isolation

Installation Guide

• Mount the module on an STBXBA2000 I/O base.
• Use an STBPDT2100 PDM for 115V AC supply.
• Confirm bus current stays at 60 mA @ 5V DC.
• Keep the field side isolated from the bus.
• Verify wiring before you apply power.

Commissioning and Maintenance

• Hot swapping lets you replace the module without shutting down the bus.
• Check input LEDs during commissioning.
• Clean only with dry methods.
• Reseat the module if input states look unstable.
• Replace damaged bases or PDMs before reuse.

Compatibility

• Works with Advantys STB systems.
• Needs STBXBA2000 base.
• Needs STBPDT2100 PDM for 115/230V AC.
• Replacement path: Modicon X80 range.
• Check backplane and PDM match before you buy.

Diagnostics

• Per-channel status LEDs help you find faults fast.
• Isolation faults may show as unstable input states.
• Bus current faults may point to PDM or base issues.
• Hot swap events are visible in the control system.

Typical Applications

• Discrete signal sensing in factory automation
• AC pilot device monitoring
• Legacy Advantys STB control panels
• Distributed I/O upgrades and repairs
• Obsolete system maintenance

Certifications and Compliance

• IEC/EN 61131-2 Type 1 signal compliance
• 1780V AC field-to-bus isolation
• IP20 protection rating
• Confirm local site rules before installation.

Packaging and Warranty

• 1x STBDAI5230 module
• 12-month warranty
• FedEx, UPS, and DHL shipping options
• Technical verification before shipment
• Packaging may use industrial surplus or refurbished materials

FAQ

• Is STBDAI5230 still produced? No. It is discontinued and superseded by Modicon X80.
• How many channels does it have? 2 channels.
• What signal type does it accept? 115V AC, IEC/EN 61131-2 Type 1.
• Does it support hot swapping? Yes.
• What base does it need? STBXBA2000.
• What PDM does it need? STBPDT2100, 115/230V AC.
• What is the isolation rating? 1780V AC for 1 minute.
• What is the protection rating? IP20.
• What is the weight? 0.120 kg.
• What warranty do you offer? 12 months.
• How do you ship? FedEx, UPS, and DHL.
• Can you test before shipping? Yes. We verify technical condition first.

Copyright © 2026 Oiltech Controls Limited. All rights reserved.

Original Source: https://www.oiltechcontrols.com/