STBDAO8210 | Schneider Electric | Advantys STB Digital Output Module
STBDAO8210 is a standard 2-channel digital output module from the Schneider Electric Advantys STB series. It switches 115/230V AC loads with 2 A per channel. The module supports hot swapping. It fits compact STBXBA2000 I/O bases. This module is now discontinued. Schneider Electric points users to the Modicon X80 range for new designs. Oiltech Controls keeps tested surplus and refurbished units for legacy systems.
Why Buy From Oiltech Controls?
- 15+ years in industrial automation spare parts
- Global shipment support through FedEx, UPS, and DHL
- Tested industrial surplus and refurbished options
- 12-month warranty on eligible products
- Technical verification before every shipment
- Support for obsolete control systems
Questions? Email info@oiltechcontrols.com or message +86 158 8020 0923 on WhatsApp.
Technical Specifications
| Brand | Schneider Electric |
| Model | STBDAO8210 |
| Series | Advantys STB |
| Module Type | Standard digital output module |
| Channels | 2 |
| Signal Type | 115/230V AC |
| Output Current | 2 A per channel |
| Output Voltage Range | 20-265V AC |
| Absolute Max Voltage | 300V AC for 10 s, 400V AC for 1 cycle |
| Response Time | 10.0 ms off-to-on, 10.5 ms on-to-off |
| Isolation | 1780V AC field-to-bus for 1 minute |
| Leakage Current | 2.5 mA @230V AC, 2.0 mA @115V AC |
| Surge Current | 30 A (1 cycle), 20 A (2 cycles) |
| Hot Swapping | Yes |
| Supply Voltage | 115/230V AC via PDM |
| Bus Current | 70 mA @5V DC |
| I/O Base | STBXBA2000 (18.4 mm) |
| PDM | STBPDT2100 (115/230V AC) |
| Protection Rating | IP20 |
| Weight | 0.125 kg |
| Operating Temperature | Not available |
| Storage Temperature | Not available |
| Lifecycle | Discontinued (superseded by Modicon X80 range) (Last verified: 2026-09) |
Installation Guide
- Mount the module on an STBXBA2000 I/O base.
- Use an STBPDT2100 PDM for 115/230V AC supply.
- Keep the base width at 18.4 mm.
- Wire each channel for 2 A max load.
- Confirm IP20 cabinet protection.
- Allow hot swap only under safe line conditions.
Commissioning and Maintenance
- Check 20-265V AC output range before power-up.
- Measure leakage current on long cable runs.
- Verify 10.0 ms and 10.5 ms response times.
- Inspect 1780V AC isolation after service.
- Replace units with hot swap support when needed.
Compatibility
- Works with Advantys STB I/O bases.
- Requires STBXBA2000 base.
- Requires STBPDT2100 PDM.
- Migrates to Modicon X80 for new projects.
- Supports legacy 115/230V AC output circuits.
Certifications and Compliance
- Isolation: 1780V AC field-to-bus for 1 minute
- Protection: IP20
- Lifecycle: Discontinued, last verified 2026-09
- Confirm local standards before installation.
Package List
- 1 x STBDAO8210 module
- 1 x technical datasheet copy
- 1 x protective packaging
- 1 x test report, when available
Warranty and Shipping
- 12-month warranty on eligible products
- FedEx, UPS, and DHL shipping
- Technical verification before shipment
- Global shipment support
Typical Applications
- Legacy Advantys STB control panels
- 115/230V AC valve and relay loads
- Obsolete automation lines
- Retrofit and spare parts programs
- Industrial switching cabinets
Diagnostic Capabilities
- Channel-level output checking
- Leakage current measurement
- Response time verification
- Isolation testing
- Hot swap status review
FAQ
Is STBDAO8210 discontinued?
Yes. Schneider Electric lists it as discontinued.
What replaces it?
The Modicon X80 range is the replacement path.
How many channels does it have?
It has 2 digital output channels.
What is the output current?
Each channel handles 2 A.
Does it support hot swapping?
Yes. Hot swapping is supported.
Which base and PDM are needed?
Use STBXBA2000 and STBPDT2100.
How do I contact Oiltech Controls?
Email info@oiltechcontrols.com or message +86 158 8020 0923 on WhatsApp.
Copyright © 2026 Oiltech Controls Limited. All rights reserved.
Original Source: https://www.oiltechcontrols.com/
Reviews
There are no reviews yet.