Schneider Electric STBNDN2212 DeviceNet Network Interface Module for Advantys STB
STBNDN2212 is a standard network interface module for the Advantys STB island. It connects the island to a DeviceNet network. A built-in RS232 debug port helps with setup and service. The module supports hot-swap, so you can replace it without full shutdown. It suits obsolete control systems that still need reliable parts.
This NIM is discontinued by Schneider Electric and superseded by the Modicon X80 range. Oiltech Controls supplies tested surplus and refurbished options for legacy automation. Each unit is checked before shipment.
Technical Specifications
| Brand | Schneider Electric |
| Model | STBNDN2212 |
| Series | Advantys STB |
| Module Type | Standard Network Interface Module (NIM) |
| Protocol | DeviceNet |
| Built-in Ports | 5-pin DeviceNet connector + RS232 debug port |
| Supply Voltage | 24V DC |
| Addressable I/O Modules | Max 32 per island |
| Hot-Swap Support | Yes |
| Protection Rating | IP20 |
| Dimensions (H x W x D) | 128.3 x 70 x 40 mm |
| Weight | 0.145 kg |
| Operating Temperature | Not available |
| Storage Temperature | Not available |
| Lifecycle | Discontinued (superseded by Modicon X80 range) |
| Last Verified | 2026-09 |
Key Technical Parameters
- Measurement Range: Not applicable for this network interface module.
- Frequency Response: Not applicable. This is a communication module.
- Sensitivity: Not applicable for NIM communication.
- Linearity: Not applicable for DeviceNet interface use.
- Resolution: Not applicable. Data handling depends on connected I/O modules.
- Temperature Range: Not available for operating and storage.
- Environmental Tolerance: IP20 rated. Use inside a clean control cabinet.
- Noise Immunity: Follow DeviceNet and Advantys STB grounding rules.
Installation Guide
- Mount the module on an Advantys STB island.
- Use the 5-pin connector for DeviceNet wiring.
- Connect 24V DC supply with correct polarity.
- Keep IP20 protection in mind. Avoid dust and water.
- Use the RS232 debug port for local setup.
- Check network address and baud rate before power-up.
Debug and Maintenance Convenience
The RS232 debug port gives direct access for commissioning and fault finding. Hot-swap support reduces downtime. You can replace the NIM without shutting down the whole island. This helps when spare parts are limited and production must continue.
Compatibility Notes
- Works with Advantys STB I/O modules.
- Connects to DeviceNet networks.
- Supports up to 32 addressable I/O modules per island.
- Superseded by the Modicon X80 range.
- Check existing network settings before replacement.
Certifications and Compliance
Certification details are not listed in the source data. Please contact Oiltech Controls for available documents. We can verify labels and test reports before shipment.
Package List
- 1 x Schneider Electric STBNDN2212 Network Interface Module
- Protective packing for safe transport
- Test report or condition note when available
Warranty and Shipping
All products include a 12-month warranty. We ship by FedEx, UPS, and DHL. Tracking is provided after dispatch. Packing follows international shipping standards.
Typical Applications
- Legacy DeviceNet control systems
- Advantys STB I/O islands
- Factory automation upgrades
- Obsolete PLC and I/O replacement
- Industrial maintenance and repair
Diagnostic Capabilities
The module supports DeviceNet communication diagnostics through the network. The RS232 debug port helps with local troubleshooting. Hot-swap support allows fast module replacement. These features help engineers isolate faults with less downtime.
Why Buy From Oiltech Controls?
- 15+ years in industrial automation spare parts.
- Global shipment support for hard-to-find items.
- Tested industrial surplus and refurbished options.
- 12-month warranty on eligible products.
- Technical verification before shipment.
- Support for obsolete control systems.
Email: info@oiltechcontrols.com
WhatsApp: +86 158 8020 0923
FAQ
Q: What is the STBNDN2212?
A: It is a DeviceNet network interface module for Advantys STB islands.
Q: Is this module discontinued?
A: Yes. Schneider Electric superseded it with the Modicon X80 range.
Q: Does it support hot swap?
A: Yes. Hot-swap support is built in.
Q: How many I/O modules can it handle?
A: Up to 32 addressable I/O modules per island.
Q: What is the supply voltage?
A: 24V DC.
Q: What ports does it have?
A: A 5-pin DeviceNet connector and an RS232 debug port.
Q: What is the warranty?
A: 12 months.
Q: How do you ship?
A: We ship by FedEx, UPS, and DHL.
Copyright © 2026 Oiltech Controls Limited. All rights reserved.
Original Source: https://www.oiltechcontrols.com/
Reviews
There are no reviews yet.