IV2-G150MA Keyence IV2 Series Sensor Head
The IV2-G150MA is a narrow field of view sensor head from the Keyence IV2 Series. It pairs with the IV2-G30 or IV2-G30F amplifier. This monochrome model captures sharp images at close range. It suits inline inspection and positioning tasks. The auto focus system cuts setup time. The white LED lighting works in pulse or DC mode. This gives stable images on moving lines.
Oiltech Controls supplies this unit with full technical verification before shipment. Contact our team at info@oiltechcontrols.com or reach us on WhatsApp at +86 158 8020 0923.
Technical Specifications
| Brand | Keyence |
| Model | IV2-G150MA |
| Series | IV2 Series |
| Module Type | Sensor head, narrow field of view |
| Reference Distance | 40 to 150 mm |
| Field of View | 40 mm: 8 x 6 mm; 150 mm: 32 x 24 mm |
| Image Sensor | 1/3 inch monochrome CMOS, 752 x 480 pixels |
| Resolution | 752 (H) x 480 (V) pixels |
| Focus Adjustment | Auto |
| Exposure Time | 1/20 to 1/50000 |
| Illumination | White LED |
| Lighting Method | Pulse or DC, switchable |
| Supply Voltage | Via connected amplifier |
| Built-in Ports | None. Connects to IV2-G30/G30F via dedicated cable |
| Operating Temperature | 0 to +50°C, no freezing |
| Relative Humidity | 35 to 85% RH, no condensation |
| Protection Rating | IP67 |
| Vibration Resistance | 10 to 55 Hz, 1.5 mm amplitude, 2 hours per axis |
| Shock Resistance | 500 m/s², 6 times per direction |
| Material | Zinc die-cast case, acrylic cover, TPU indicator cover |
| Weight | Approx. 75 g |
| Lifecycle Status | Active. Keyence production confirmed 2026-09 |
Note: IP67 rating does not apply when using the polarized light filter OP-87899/OP-87900/OP-87901 or the magnifying lens OP-87902. Vibration and shock ratings do not apply when using dome attachments IV2-GD05 or IV2-GD10.
Key Performance Data
- Measurement Range: 40 to 150 mm reference distance
- Resolution: 752 x 480 pixel monochrome CMOS
- Frequency Response: Exposure from 1/20 to 1/50000 second
- Sensitivity: White LED with pulse and DC modes
- Linearity: Stable across the full field of view
- Temperature Range: 0 to +50°C operating
- Environmental Resistance: IP67, vibration and shock rated
- Anti-Interference: Pulse lighting reduces ambient light noise
Installation Guide
Mount the IV2-G150MA at the target distance. Keep the front cover clean. Connect the dedicated cable to the IV2-G30 or IV2-G30F amplifier. The auto focus handles fine adjustment. Set the lighting mode to match line speed. Use pulse mode for fast moving parts. Use DC mode for static inspection.
Setup and Maintenance
Setup is simple. The amplifier handles all image processing. The auto focus removes manual lens tuning. Maintenance needs are low. Wipe the acrylic cover with a soft cloth. Check the cable connection each shift. Replace the head if the image quality drops.
Compatibility
The IV2-G150MA works only with the IV2-G30 and IV2-G30F amplifiers. It uses a dedicated cable. It has no built-in ports or protocols. All communication runs through the amplifier. Optional accessories include the OP-87899/OP-87900/OP-87901 polarized light filters, OP-87902 magnifying lens, and IV2-GD05/IV2-GD10 dome attachments.
Certifications
This unit meets Keyence factory standards. It carries an IP67 protection rating. Confirm local compliance needs with your panel builder. Oiltech Controls verifies each unit before shipment.
Packing List
- 1x Keyence IV2-G150MA sensor head
- Protective packaging
- Test report from Oiltech Controls
Warranty and Shipping
Every unit comes with a 12-month warranty. We ship worldwide by FedEx, UPS, and DHL. Tracking goes out with each order.
Typical Applications
- Inline part inspection
- Position and presence checks
- Small part measurement
- Assembly verification
- Label and mark reading
Diagnostic Capabilities
The head sends raw images to the amplifier. The amplifier runs inspection logic. This design keeps the head small and light. Faults show on the amplifier display. This makes troubleshooting fast on the line.
Why Buy From Oiltech Controls?
- 15+ years in industrial automation spare parts
- Worldwide shipping support
- Tested surplus and refurbished options
- 12-month warranty on every unit
- Technical check before every shipment
- Help with obsolete control systems
Questions? Email info@oiltechcontrols.com or message us on WhatsApp at +86 158 8020 0923.
FAQ
Q: Which amplifier works with the IV2-G150MA?
A: The IV2-G30 and IV2-G30F amplifiers.
Q: What is the field of view?
A: 8 x 6 mm at 40 mm, and 32 x 24 mm at 150 mm.
Q: Is the head IP67 rated?
A: Yes, except when using certain filters or the magnifying lens.
Q: What is the warranty?
A: 12 months from Oiltech Controls.
Q: How do you ship?
A: FedEx, UPS, and DHL worldwide.
Copyright © 2026 Oiltech Controls Limited. All rights reserved.
Original Source: https://www.oiltechcontrols.com/
Reviews
There are no reviews yet.