STBACO0120 – Schneider Electric Advantys STB 1-Channel 4-20 mA Analog Output Module
The STBACO0120 is a standard 1-channel analog current output module from the Schneider Electric Advantys STB series. It outputs a 4-20 mA current signal with 15-bit plus sign resolution. Field-to-bus isolation is rated at 1500V DC. The module supports hot swapping. It mounts on the STBXBA1000 I/O base, 13.9 mm wide. Power comes from an STBPDT3100 PDM at 24V DC. This series is discontinued and superseded by the Modicon X80 range. Oiltech Controls supplies tested surplus and refurbished options for legacy Advantys STB systems. Contact info@oiltechcontrols.com or +86 158 8020 0923 for stock and lead time.
Technical Specifications
- Brand: Schneider Electric
- Model: STBACO0120
- Series: Advantys STB
- Module Type: Standard analog output module
- Channels: 1
- Signal Type: 4-20 mA current
- Range: 4-20 mA
- Resolution: 15 bits + sign
- Isolation: 1500V DC field-to-bus
- Hot Swapping: Yes
- Supply Voltage: 24V DC via PDM
- I/O Base: STBXBA1000, 13.9 mm
- PDM: STBPDT3100, 24V DC
- Protection Rating: IP20
- Operating Temperature: Not available
- Storage Temperature: Not available
- Lifecycle: Discontinued, superseded by Modicon X80 range
Performance Details
- Measurement Range: 4-20 mA analog current output
- Frequency Response: Standard analog output response
- Sensitivity: 15-bit plus sign resolution
- Linearity: Typical for 15-bit analog output stage
- Resolution: 15 bits + sign
- Temperature Range: Not available in current documentation
- Environmental Resistance: IP20 rated for cabinet use
- Noise Immunity: 1500V DC isolation supports noise rejection
Installation Guide
- Mount the STBXBA1000 I/O base on a DIN rail.
- Snap the STBACO0120 module onto the base.
- Connect the STBPDT3100 PDM for 24V DC supply.
- Wire the analog output loop to field devices.
- Check isolation between field and bus before power-up.
- Use hot swapping only in a compatible system setup.
Commissioning and Maintenance
- Verify output current with a calibrated meter.
- Check channel status after power-up.
- Confirm 4-20 mA loop integrity.
- Replace modules hot only when the system allows it.
- Keep the IP20 enclosure clean and dry.
- Record module identity for spare parts tracking.
Compatibility
- Works with Advantys STB I/O bases.
- Requires STBXBA1000 base or equivalent.
- Uses STBPDT3100 PDM for 24V DC.
- Superseded by Modicon X80 range.
- Best for legacy STB systems needing 4-20 mA outputs.
Certifications and Standards
- 1500V DC field-to-bus isolation rating.
- IP20 protection rating.
- Schneider Electric industrial quality system.
- Check local codes for final installation approval.
Packing List
- 1 x STBACO0120 module.
- 1 x anti-static protective bag.
- 1 x protective carton.
- Documentation copy if available.
- No I/O base or PDM included unless stated.
Warranty and Shipping
- 12-month warranty on this module.
- Ships within 24-28 hours after order confirmation.
- Couriers: FedEx, UPS, DHL.
- Each unit is checked before dispatch.
- Contact us for stock and lead time.










Reviews
There are no reviews yet.